[AlanLT]

I'm moving a BMW CB from an '07 LT to an '08 LT. Both are equipped with VOICE II. Can anyone tell me where the PTT button connects to the VOICE II? I thought I had identified all of the connectors before I had to button the '07 back up, but I apparently missed one. I really don't want to open it back up to figure out what I missed. There is only one matching 2 pin connector coming out of the VOICE II on the '08, and it is connected to the GPS. Any ideas?

Thanks,

 

[SmokinJoe]

On my 06 the blank PLUG is located under the left handlebar covers and was prewired to the voice II. You need to buy the PTT switch. Simple enough to check if the wire is there, and just jump it whith the CB connected to see if it keys to talk.

 

[AlanLT]

I found the problem. When I removed the PTT from the '07 bike, I took the whole PTT wire from the button back to the VOICE II. When I installed it in the '08, I had the factory wire that was disconnected at the button end plugged in to that jack.

Thanks for the response.