Try here http://www.bmwlt.com/forums/showthread.php?t=64874&highlight=programming , and go to post #2. I didn't read it but it should help you out. Also if you get the manual from BMW it tells you how to reprogram the alarm using the FOB.
Programming new FOB
1 - 8 of 8 Posts
Those (broken links in post #2 look down further) are for the 05 and up alarms. I have never done the earlier bikes so maybe some one will chime in on the location of that pesky jumper.
Maybe these will help.
Maybe these will help.
Attachments
Dave, it's not the big round one. The right one is taped up in the area of the two cable ties and underneath the frame rail. I'll try to post pic later this morning. It really is tough to find as they have it really taped up.
Ok just a clarification the wire you want is further back( my bad) on the right side, here is a picture of what you are looking for. You most likely will have to remove pillion seat.
.
![]()
Ok just a clarification the wire you want is further back( my bad) on the right side, here is a picture of what you are looking for. You most likely will have to remove pillion seat.
.
1 - 8 of 8 Posts
