BMW Luxury Touring Community banner

1 - 3 of 3 Posts

·
Registered
Joined
·
835 Posts
Discussion Starter #1 (Edited)
disregard

Sorry all, I found it in the Hall.
Somewhere in the past I saw a post about replacing the autocom earphones with the speakers from Radio shack titanium headphones. So, today Io went and bought them but have nbo idea how to wire them in. The autocom has 2 wires per speaker and the new headphones have (Ithink) 1 wire per side. Does anyone remember the previous post and/or how do I wire them in? Thanks
 

·
Registered
Joined
·
10 Posts
Speaker wiring

If you find only one lead going to each speaker there must be a common ground. I would guess you can hook one lead where the single lead goes and ground the other to the speaker.

That's my guess, and I am sticking to it until somebody who knows something shows up and corrects me.

Angelo
 

·
Old Dawg
Joined
·
3,287 Posts
Are you sure that there aren't two wires inside of the one plastic cover. sometimes on headphones there is an inner wire protected by a plastic sleave and then an outer one. Like a cable TV wire for example (on a larger scale).
 
1 - 3 of 3 Posts
Top