I have the constant 12V positive on the red wire. What I am missing is the power that is switched by the ignition switch. I have that switched power at the front map light that comes to it on a mauve/black stripe wire. There is a mauve/black stripe wire coming into the radio stingray push button control but I do not find the switched power there. It is also not at the connector that connects the stingray to the rest of the bike (the innermost connector of the 3). I do not have any wiring diagrams so I'm doing a lot of guessing. Does anyone know where the power to the map light and the power to the radio connect? They both disappear into the wiring harness.