[oldracer1943]

Hi folks. Just purchased a second owner K1200lt. Put 600 clicks on it and its great. Parked the bobbers while we take up touring in comfort.

BUT, have a dilema: previous owner installed an after market JMCB 2003. For starters there is no sound from the BMW radio. After the dawnting task of disrobing the LT I discovered that the radio was never hooked up. JM has not been helpfull with suggestions as to how to nor offers any sort of schematics. Has anyone have a source of wiring diagram for the J&M harness???

Someone offered that if there is a fader to fade to the radio to the rear and hook up the input to the JM from there?????

Need more help,

Jim

 

[jdunique]

J&M 2003 CB

I also have a 03 LT and I have recently done quite a bit of research with regard to intstalling the CB. It appears that the J&M 2003 model is not compatible with our BMW system but they do make a model that is, here is a link to their website
http://www.jmcorp.com/SeeProducts.asp?PF=25

attached are the instructions for the model they make that is for our bikes

Good luck
Big Jim