BMW Luxury Touring Community banner

1 - 8 of 8 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter #1
I am replacing a broken front brake lever at the right handlebar end assembly on my 2000 K1200 LTC.

If anyone has done this, I will appreciate your tips. Upon first glance at the diagrams and the bike, it's not clear to me how to remove the bearing screw that seems to hold it in place.

Thanks very much!

Mark
 

·
Registered
Joined
·
96 Posts
Discussion Starter #3 (Edited)
Thanks

Thanks. I want to get it right the first time. Which parking lot?
Mark
 

·
Registered
Joined
·
4,905 Posts
Which parking lot? :rotf: :histerica


We need to hear from this guy more often!!!

Never changed a clutch or brake lever on a BMW. With the Kawasaki's, you have to be careful not to smash the micro-switches...but other than that, pretty straight-forward. I'm sure the BMW's are no more difficult. Just take your time. And good luck finding the right parking lot. ;)
 

·
Premium Member
Joined
·
124 Posts
Brake lever replacement

Hey, Joe,

It's Grif's FOCUS on T & A which puts him over the top! The man's got FOCUS!

Terry
 
1 - 8 of 8 Posts
Top