BMW Luxury Touring Community banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
KD tools 2467 nut wrench suits to open almost any final drive big nut in R and K bikes 1983 - 2003.
You can buy it in EBay, 10.95 US dollars + delivery
BMW tool for this is number 83300402060

Pekka
;) ;) ;)
 

·
Registered
Joined
·
40 Posts
...and from my post earlier this month...

I bought one and it shipped to California in a week. This will do the job and it only cost ~$24.00 including shipping. Be sure to search eBay for "swinging arm", not "swing arm". It included the 12mm allen insert, too.

It's slightly different than the one pictured in the ad cited. There are others listed that show the one that I received. It has a window with 180 degree access cutout. The open socket end is closed and does not have an open "C" shape.

Box label says...

LASER
p/n 4740
Swinging Arm Bearing Tool
BMW Motorcycles
For installing or adjusting the taper roller bearing in the swinging arm. Includes 30mm window socket. 12mm Hex key.
Use on BMW R1200GS/GT/CT Motorcycles.

Wokrs on my LT and early GT.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #4 (Edited)
pekkavee said:
KD tools 2467 nut wrench suits to open almost any final drive big nut in R and K bikes 1983 - 2003.
You can buy it in EBay, 10.95 US dollars + delivery
BMW tool for this is number 83300402060

Pekka
;) ;) ;)
This is for the dia 61 mm round nut inside the final drive in order to change the smaller seal.
KD Tool 2467

I also have this for the 30 mm nut
Swinging arm tool

Pekka
;) ;) ;)
 
1 - 6 of 6 Posts
Top