BMW Luxury Touring Community banner
1 - 12 of 12 Posts

· Registered
Joined
·
242 Posts
Discussion Starter · #1 ·
Anyone try flanging an R1100RT front fender onto an pre '06 LT? (Or any other kind of fender/mudguard for that matter)

Rebuilding the LT (deer strike in 2010) . Got all the parts but the front fender and rocker panels and finding these is tough!
 

· Premium Member
Joined
·
4,850 Posts
PM sent
 

· Registered
Joined
·
178 Posts
Yes, the r1100rt fender will fit with a little material removed from under the top portion of the fender. The lower bolt holes are already on the LT forks. Paint to match and the total package looks like maybeit should, If you want pics let me know, did my 2001 and it looks fly!
 

· Registered
Joined
·
242 Posts
Discussion Starter · #5 ·
ebear695 said:
Yes, the r1100rt fender will fit with a little material removed from under the top portion of the fender. The lower bolt holes are already on the LT forks. Paint to match and the total package looks like maybeit should, If you want pics let me know, did my 2001 and it looks fly!

Eddee , you're the greatest! Email sent for pics. In the meantime I'll snag the RT fender off of Ebay!
 

· Registered
Joined
·
375 Posts
There he is.



Is not an 06 is an 01 but should be the same. This fender is quite flexible you can bed it a little that the holes fit in to the fork holes. Long screws as before on the top holes and two short once on the lower end.

Manfred
 

· Registered
Joined
·
242 Posts
Discussion Starter · #8 ·
Awesome, thanks Manfred. Looks very good. I've ordered the RT fender on Ebay. The best thing about this is that there are plenty of used RT fenders out there at a very resonable price. (Try finding an LT fender)

Thanks everyone, assignment complete, we're GOOD TO GO!
 

· Registered
Joined
·
334 Posts
Yes, I think you have found a pretty good alternative. After seeing Manfred's photo, I think you are going to like that unique look. Where I come from, the LT itself is plenty unique just because it's not a Harley.
 

· Registered
Joined
·
7 Posts
I am in need of Front Fender for my '99. Did you have to modify the R1200RT fender to get it to fit the LT?

I am OK with paint I purchase rattle cans color matched paint through APS.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top