Join Date: Jan 2013
Location: ANTWERP, ANTWERP, BELGIUM
Re: Removing K1100LT tank
Sorry for my English, but I hope this might help you.
You don't need to remove the tank.
I've put an inox or stainless steel bar ( made by a craftsman) between the two screws on top of the windshield , just below the movable windscreen..
There you can put the GPS holder and the wiring goes under the removable part at the inside of the windscreen ( best to remove the left hand side) You can easily reach the battery. Better is to connect the wires of the GPS on the positive and negative pole of the tale light. In order to get the GPS active the moment youn turn on the ignition.
You may use a connection half way should the GPS wire be tho short
greetings from Belgium