|Topic Review (Newest First)|
|Jan 15th, 2008 6:36 am|
I went to http://www.ram-mount.com and looked at the catalog.
It looks like there are several RAM mounts that can be adapted.
This is the one I use with the proper bolt to go through the mirror hole and it gives me some adjustability to possition the ball out of the way.
RAM .87 X 2.25 WITH 11 MM HOLE &
But here are several other options that would work without having to modify anything. Just use the proper length bolt for the mirror hole.
RAM BASE WITH 1/4"-20 HOLE HEX &
1/4" POST WITH 1/4"-20 THREADED
RAM 1.5 X 1.75 BASE 5/16" HOLE & 1"
RAM SINGLE BALL WITH 1/4" NPT.
RAM BASE WITH 9 MM HOLE AND 1"
Good Luck. I like having my GPS mounted in that location.
|Jan 14th, 2008 10:34 pm|
|gglove||Thanks for all the input.|
|Jan 14th, 2008 9:55 pm|
I used the Ztechnik Spider Mount for a Lowrance Iway. This is a very large GPS and it does block about 50% of the left mirror but it is still useable and I enjoy the positioning of the gps. there is no mods needed.
|Jan 14th, 2008 6:23 pm|
|2Wheelroadtrip||I used the mirror hole RAM mount for my free E-Trex gps. I only did this for about 2 weeks and it worked well until I installed the mirrors in the holes. There was no modification needed to install the ram mount. I haven't noticed them around anymore. I thought Raffy had a clearance on them. Maybe they are discontinued?|
|Jan 14th, 2008 2:09 pm|
Well, not a GPS, but I used the Ztechnik Spider Mount for my Ham radio. See attached.
|Jan 13th, 2008 10:39 pm|
Has anyone used a RAM mount post for the LT in the mirror hole? I have heard it can be done but may need some modification of what is offered by RAM. Any information is much appreciated.
I am trying to mount my Garmin Nuvi.