BMW Luxury Touring Community - Reply to Topic
Thread: Top Case Recommendations for 2010 R1200RT Reply to Thread
Title:
Message:
Trackback:
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:
 

Register Now



In order to be able to post messages on the BMW Luxury Touring Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
May 18th, 2019 2:25 am
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

That's a pretty good looking case. The GIVIs I checked out were both from the Monolock series, not the Monokey. I'm guessing the Monokeys would be closer in quality to the Shad top cases, but they cost quite a bit more than the Monolock series, and for me the locking mechanisms they share with the Monolock series are a deal-breaker. The one thing I do like about the GIVI cases are the abundance of light kits available for them. How have you liked the 470?
May 17th, 2019 3:55 pm
rockitcity I think the Shad SH50 looks best on your bike. Mount looks good on or off. I went with the Givi V47 that I already had. Quick easy mount. Matches well enough.
May 17th, 2019 2:16 pm
Kabish
Re: Top Case Recommendations for 2010 R1200RT

Looks good!

I have a GIVI Outback (black) topcase from my old bike sitting in my garage... Found a guy on eBay that was selling the plate for the RT for $70 bucks, so should had jumped on that.. I miss not having a topbox but my bike has the keyless ride and also central locking.... Ugh $1700 bucks for that case...
May 17th, 2019 1:42 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

(Due to file upload limitations, I'm posting this four times, with different photos attached to each)

Shad SH46 pictures
May 17th, 2019 1:41 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

(Due to file upload limitations, I'm posting this four times, with different photos attached to each)

Shad SH50 pictures
May 17th, 2019 1:40 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

(Due to file upload limitations, I'm posting this four times, with different photos attached to each)

Shad SH48 pictures
May 17th, 2019 1:35 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

(Due to file upload limitations, I'm posting this four times, with different photos attached to each)

After research and comparison I decided to go with a SHAD top case. I ordered three different models so I could compare them. Here is my review of them. Hope you find it helpful.

The three cases I ordered were the SH46, the SH48, and the SH50. I actually got all three on Amazon, as they had some good pricing and I can return them via my local Kohls store if I choose and not pay any return shipping. (If you ever want to use this return path make sure that the seller of the product you are buying is Amazon, and not a 3rd party. I also donít think they have rolled this out nationwide yet.) The SH46 uses a different mount than the 48 and 50 that is a bit smaller (see picture). Let me just say first up front that I thought all three of these cases exceeded the quality of the GIVI cases I looked at previously (see above). I thought the build quality of the SH48 and SH50 was even better than the SH46, which I believe is an older model. The SH46 was still good, but the other two felt even sturdier, especially the SH50 - which was simply rock solid and considerably better workmanship and quality than the GIVI cases I closely examined earlier. The locking and release mechanisms work in similar fashion on all three, but again the SH48 and SH50 were a bit better than the SH46. But I would definitely prefer even the SH46 locking system to the GIVI cases. All three allow you the ability to open the case without a key if you wish, a big advantage in my book over the GIVI cases. But more than that, the mechanism just seemed better made. Again the SH50 was especially nice. When you released the top it popped open just a bit, so you could open it with one hand instead of pulling the release with one hand and pushing it open with the other.

All three cases could fit two full face helmets (see pictures). With the SH46 you had to place the helmets on their sides, and there wouldn't be room for anything else. Both the other cases would allow you simply to set the helmets in base down, which was nice. Both also allowed some additional space for rain gear or something; the SH50 had considerable extra space. You should notice that the shape of the SH50 is more rectangular like a suitcase, whereas the other two are more angled, getting narrower in the back of the motorcycle. The SH48 makes up the lost space from this narrowing by being a little deeper. Depending on what you typically want to carry this could make the 48 preferable over the 50, but I thought for most situations the 50 would pack better. Both feel extremely sturdy without being terribly heavy. Backrests are available for all three of these case. The SH50 I ordered had one pre-installed. It looks like it will be decent and seems to be good quality.

I ruled out the SH46 because I thought it was just a little smaller than what I wanted. As the other two use the same mount I decided to go ahead and attach the mount to the bike. Based on feedback I received on this forum and elsewhere I decided to pay for Shad's custom mounting kit for the R1200RT. I'm glad I did. A bit of fiddling was needed to get the plates in just the right position but then it went on great. If you buy the RT specific mount you shouldn't need the other universal mounting hardware that is provided with the top case (at least not for an R1200RT). The mount seemed extremely sturdy and I have no concerns about its stability. Iíve seen some comment that drilling or alternate hardware was required in addition to this kit. Iím not sure what they did to require that, but no drilling or other modifications were required with this RT mount. I should also mention that a. the RT specific mount can be difficult to find (at least in the States), and b. the pricing of it varies considerably. In the time I've been looking at top cases it has been unavailable at times on Amazon in North America, and has also been priced as high as $89 (with a 1-2 month wait) and $37.49 in stock. When I saw it had dropped to that price I bought one immediately. Within days it went up again. It was difficult to find elsewhere (even at Revzilla, which carries lots of Shad stuff). The SHAD part number for the R1200RT specific mount is WORT19ST (they also make specialized mounts for a number of other bikes; check their website). If you are looking for one, be patient and look around some, and hopefully you won't have to pay $90-100 for it. But at $37.49 it was a no-brainer and definitely made for an easier (and I think also more secure) installation. The case mount looks decent when the top case is off (see picture).

As I only have a week left on my return option to Amazon, I have to pick one of these so I can return the others. For me it was between the 48 and 50, and I've pretty much decided on the 50 (unless someone provides some information to change my mind). It's a matter of personal preference which one looks the best. I would say the SH48 probably looks the best, but with the two-tone color of my RT (especially the side cases) it turns out that the SH50 style almost looks like it was made for my bike. The silver band around it is close to the color of my side cases, and matches the color of the top rack and some other components on the bike. So I suspect I'll end up with that one. I also like that the top of the SH50 is a little flatter, in case I ever want to strap something on top of it. There is also an optional rack you can buy for the top of the SH50 if you like, although it is pretty small.

My only complaint about all three of these, but especially the 48 and 50, is that when you have the case open the lid doesn't always want to stay up. It wants to drop back down into the closed (but not latched) position. This may get better as the support strap for the lid loosens or stretches a bit, but in the meantime it can be a little annoying. And I should mention one other caveat. If Shad's 58X Expandable case ever gets back in stock somewhere I would definitely look into that one as well. It is another $100 or more expensive over these cases, but the flexibility of it might be nice. But no one had it in stock in this past month while I was looking for these. In terms of cost, the price of these cases does move around a bit on various sites, so you might want to watch the market for a bit and wait for the best deal. The SH50 is the most expensive of these three (understandably as it is the largest), but it is a fairly big increase over the SH48 for just 2 liters of space (although again I think more usable space).

Check out the pictures for more details, and if you want to know something else I'll try to help. And maybe after I take this for a couple trips I'll post an update on how it performed on the road too.
Apr 26th, 2019 3:46 pm
poodad
Re: Top Case Recommendations for 2010 R1200RT

I've got the older Shad 50L topcase, and I'm quite happy with it. I bought it on ebay as an open box item. The RT specific mounting kit is ridiculously expensive for what it is, but worth it in the long run. Making something equivalent would have taken me several hours.

The matching rack to go on top is handy sometimes, but is too small to really be useful. About the only thing I use it for is to strap on two small folding lawn chairs.
Apr 25th, 2019 11:51 am
bandytales
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by RockyHayes View Post
...I have a used BMW 28 liter topcase
Yes, these are nice compact cases. Mine will hold a flip front helmet (whereas my full size R1150RT BMW top case can't!).
Apr 25th, 2019 10:49 am
RockyHayes
Re: Top Case Recommendations for 2010 R1200RT

North Woods Wanderer, I have a used BMW 28 liter topcase for sale - it's in very good condition, and can be re-keyed to match your bike. If you are interested, please email me at: rockyhayes AT gmail DOT com.

Thanks,
Rocky Hayes
Apr 23rd, 2019 11:51 am
bandytales
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by microdoc View Post
My buddy George did mount the top case from his R1100RT on his R1200RT, but it required the adapter he made from a R1100RT rear rack. Besides being very handy in the work shop, he is a skilled machinist, so Iím not sure if this is an easy modification to do. I will say, it looks great, better than a GIVI or some of the other 3rd party top cases, and mounts & dismounts as effortlessly as on a R11RT.

Why would you do that? The 1100/1150 top case is crap. It is small and useless?


Almost any other option is better than that one!
Apr 21st, 2019 6:51 am
microdoc
Re: Top Case Recommendations for 2010 R1200RT

My buddy George did mount the top case from his R1100RT on his R1200RT, but it required the adapter he made from a R1100RT rear rack. Besides being very handy in the work shop, he is a skilled machinist, so Iím not sure if this is an easy modification to do. I will say, it looks great, better than a GIVI or some of the other 3rd party top cases, and mounts & dismounts as effortlessly as on a R11RT.
Apr 19th, 2019 11:09 am
alegerlotz
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by Pappy53 View Post
Get the Shad from Revzilla. Seriously, they have amazing customer service and returning it would be no problem. That's where I got mine. Do buy the RT-specific adapters. While it might be possible to mount it without, it would be very difficult. Good reporting about the lock on the Givi's.
Cycle Gear and Revzilla are the same company. If one is out of stock, so's the other.
Apr 18th, 2019 7:21 pm
Pappy53
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by North Woods Wanderer View Post
Well, Cycle Gear cancelled my order for the Shad 58 expandable. Out of stock. That was the one I was most keen to have a look at, but they appear to be in very short supply. They did give me a $20 credit for their mess-up, so kudos to them on that. I've received the two Givi cases. I'm not sure what they were thinking when they designed the locking mechanisms on these but they are a total pain in the ***. Both the Monolock 470 and 450 use the same locking mechanism, which does work but is unnecessarily difficult to use. And you cannot remove the key with the case in the unlocked position. The 470 lock also appears to be partly defective. Before I even opened it the first time a little plastic piece fell out of the bottom of the case where it should attach to the base plate. Even when the case is in the locked position on that case the release button to remove the case from the plate remains unlocked. It appears that some tiny piece of plastic is all that the base plate lock consists of. If it breaks, the case can no longer be locked onto the bike.

I prefer the styling on the 470. And they are close enough in size that I would take the extra 20 liters on the 470 over the 450 if the price was similar. In fact the bottom half of both cases is identical; the 470 just has a different top half that is slightly higher. 2 full face helmets fit fine in either, but in the 470 I could throw a fleece sweatshirt on top of the helmets and it would still close, not in the 450. They both use the same Monolock universal base plate. But I'm not sure I'm ready to settle on either of these yet. Maybe I need to look at one of their Monokey series cases.

I did see a Coocase for sale locally on Craigslist. Looked nice and has some interesting features like power locks, but googling reveals that they've had a lot of problems with them.

It sure seems like there should be more good options in the marketplace for these - sighÖ

I've attached pictures of the two Givi cases above. I didn't look too closely at the mounting system to see how well the universal mount would work on the RT. When I have more time I'll try to do that.
Get the Shad from Revzilla. Seriously, they have amazing customer service and returning it would be no problem. That's where I got mine. Do buy the RT-specific adapters. While it might be possible to mount it without, it would be very difficult. Good reporting about the lock on the Givi's.
Apr 18th, 2019 4:46 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by Pappy53 View Post
Well, that would be good thinking on their part for sure but HAVING to use a key every time would still a pain in arse to me.
I quite agree!
Apr 18th, 2019 4:40 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by North Woods Wanderer View Post
Well, I've ordered the Givi Monolock 450 and Monolock 470, as well as the Shad 58 expandable. I'm going to get my hands on them directly and compare. I can return any/all of them for free at Cycle Gear if I don't like them. I'll post an update after I have a closer look at them. In the meantime any other comments and recommendations are still welcome.
Well, Cycle Gear cancelled my order for the Shad 58 expandable. Out of stock. That was the one I was most keen to have a look at, but they appear to be in very short supply. They did give me a $20 credit for their mess-up, so kudos to them on that. I've received the two Givi cases. I'm not sure what they were thinking when they designed the locking mechanisms on these but they are a total pain in the ***. Both the Monolock 470 and 450 use the same locking mechanism, which does work but is unnecessarily difficult to use. And you cannot remove the key with the case in the unlocked position. The 470 lock also appears to be partly defective. Before I even opened it the first time a little plastic piece fell out of the bottom of the case where it should attach to the base plate. Even when the case is in the locked position on that case the release button to remove the case from the plate remains unlocked. It appears that some tiny piece of plastic is all that the base plate lock consists of. If it breaks, the case can no longer be locked onto the bike.

I prefer the styling on the 470. And they are close enough in size that I would take the extra 20 liters on the 470 over the 450 if the price was similar. In fact the bottom half of both cases is identical; the 470 just has a different top half that is slightly higher. 2 full face helmets fit fine in either, but in the 470 I could throw a fleece sweatshirt on top of the helmets and it would still close, not in the 450. They both use the same Monolock universal base plate. But I'm not sure I'm ready to settle on either of these yet. Maybe I need to look at one of their Monokey series cases.

I did see a Coocase for sale locally on Craigslist. Looked nice and has some interesting features like power locks, but googling reveals that they've had a lot of problems with them.

It sure seems like there should be more good options in the marketplace for these - sighÖ

I've attached pictures of the two Givi cases above. I didn't look too closely at the mounting system to see how well the universal mount would work on the RT. When I have more time I'll try to do that.
Apr 18th, 2019 10:32 am
rockitcity
Re: Top Case Recommendations for 2010 R1200RT

New member joining in here, as I just bought a 2013 R1200RT. I commute daily on Southern California freeways, and because of the ability to lane-split here, I really like leaving the panniers at home and use a top case to store my gloves and helmet at work. I have used top cases on my last 3 bikes (Suzuki V-Strom and Bandit 1250, as well as my still current Triumph Tiger Explorer) and really find them useful. I was looking for a BMW 49L top case and missed out on a near-new one on Craig's list for $500, which I though was a decent price. Of course, I'd still have to re-key it to my bike, adding to the cost. No way was I going to consider buying a new one. Most of the used ones I see on Craig's list or e-bay are pretty ratty and would need some refurbishing.

Since I already have a Givi V-47 with aluminum trim on my Triumph, I decided to get the Givi adapter for the RT. This was around $100 from Twisted Throttle. Fitment was pretty straight-forward, but a little fiddly with the metal spacers that fit into the holes in the BMW tail rack. I did not go with the more expensive metal adapters as the molded plastic one is plenty sturdy (Same type as on my Triumph.) I don't mind carrying another key with my bike key.

Turns out today I am happier than I expected with my choice to keep the same case. I started up the RT early to get a head start on the workday before the holiday, start to ride off, and am faced with flashing red triangle. Well, this can't be good, so I turned around, went back in the driveway and parked the RT (turns out to be TPMS-must have picked up a nail while buying some spacers to make my tank bag mounting ring work, but that's another story...) It was very convenient to just transfer the top case from the RT to the Triumph and be on my way. I guess I'll be learning how to change an RT rear tire later...

So the Givi looks fine on the bike, and the aluminum trim matches my grey RT well. BTW, North Woods Wanderer mentioned the Monolock series; I think the Monokey series is more heavy-duty. The Givi works for me.
Apr 18th, 2019 5:14 am
Hoosier
Re: Top Case Recommendations for 2010 R1200RT

I bought the Givi 56 liter case, the light kit, and the aluminum top case rack. The case and the rack had obviously been sold, returned at least once, and then sold again to me. The case was in good shape. The rack was missing parts. The rack uses non removable fasteners in its installation. Those fasteners were already installed by the previous owner. I didnít care for how the rack installed on the bike. It complicates the removal and the installation of the bikeís luggage rack. I ended up returning it all for someone else to buy.

I found a good enough deal on BMW 49 liter top case. It was old new. I like it. I like the way it attaches to the bikeís rack. It is designed for the bike. I avoid a dodgy installation of someone elseís adapter plate. I only use the case on multiday trips to help me carry my stuff traveling. When I get to my destination I take it off and leave it in the room like a piece of luggage.

I donít need a trunk on my bike to store my helmet. How the case attaches to the bike was important to me. Everyone has their own need and desires. After market cases offer some attractive alternatives to the BMW case. You can certainly save some money going after market. I like saving money.
Apr 17th, 2019 6:57 pm
Pappy53
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by ebiss9 View Post
Although it does require a key to open the box latch every time, I tried to close the latch with the key out of the lock and could not. Unless things have changed recently with Givi locks, you can't accidently lock your key in it.
Well, that would be good thinking on their part for sure but HAVING to use a key every time would still a pain in arse to me.
Apr 17th, 2019 6:40 pm
ebiss9
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by Pappy53 View Post
Givi you need the key to open it every time (it cannot be left unlocked) which also introduces the joy of accidentally locking your keys in the case.
Although it does require a key to open the box latch every time, I tried to close the latch with the key out of the lock and could not. Unless things have changed recently with Givi locks, you can't accidently lock your key in it.

Quote:
Originally Posted by North Woods Wanderer View Post
Well, I've ordered the Givi Monolock 450 and Monolock 470, as well as the Shad 58 expandable. I'm going to get my hands on them directly and compare. I can return any/all of them for free at Cycle Gear if I don't like them. I'll post an update after I have a closer look at them. In the meantime any other comments and recommendations are still welcome.
Whatever top box you decide to choose will be the right one I'm sure. I've finally completed the extra brake lights for my recent Givi V46 installation. I favored this unit with the optional brake light kit as it breaks the circuit when you open the lid or remove the box from the rack mount, no wiring to unhook although I've read that the connections are sometimes troublesome.......
Apr 17th, 2019 1:43 am
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

Well, I've ordered the Givi Monolock 450 and Monolock 470, as well as the Shad 58 expandable. I'm going to get my hands on them directly and compare. I can return any/all of them for free at Cycle Gear if I don't like them. I'll post an update after I have a closer look at them. In the meantime any other comments and recommendations are still welcome.
Apr 11th, 2019 11:50 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by Scurvy View Post
I hate the top case. For 2 reasons, I kick it every time I sling my leg over the saddle. I found the case was also very large outside for minimal storage inside.

I see you've looked at my pelican case setup, It's still my favorite top case option I can attach either the 1510, or the 1610. Very utilitarian but I've got no issue with that. Form before fashion.. The 1510 has a nice low profile so It's not a sail. The 1610 is more like a box van on the back..

When I need more "stuff" with the 1510, then I just ratchet strap my duffel bag on top of the pelican..
Hi Scurvy.

Yes, I did look at that Pelican setup. Looked pretty cool, although I'm not sure I'd be as adept as you in fashioning a system to attach the Pelican to. If I go the more utilitarian route I will maybe try your approach out.
Apr 11th, 2019 9:11 pm
Scurvy
Re: Top Case Recommendations for 2010 R1200RT

I hate the top case. For 2 reasons, I kick it every time I sling my leg over the saddle. I found the case was also very large outside for minimal storage inside.

I see you've looked at my pelican case setup, It's still my favorite top case option I can attach either the 1510, or the 1610. Very utilitarian but I've got no issue with that. Form before fashion.. The 1510 has a nice low profile so It's not a sail. The 1610 is more like a box van on the back..

When I need more "stuff" with the 1510, then I just ratchet strap my duffel bag on top of the pelican..
Apr 11th, 2019 7:24 pm
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by CWRoady View Post
Have you considered CraigsList? Here is one in my local Orange Coast, CA edition that clearly needs paint, but IMHO they need to be color matched anyway ;-) Not saying this is a great deal, just using it as an example that they do come up every now and then.

https://orangecounty.craigslist.org/...854044091.html
Thanks for that. Yes, I've been watching Craigslist, and also eBay, but haven't seen anything compelling in my area just yet. Have seen some used Givi top cases out there though.
Apr 10th, 2019 6:08 pm
alegerlotz
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by TF1200RT View Post
The BMW 49L case that I have does not have carpeting and a false bottom (I know because I have taken it apart). And as far as it being a sail, try riding a K1300GT with a top case in a crosswind and not being two-up. Not a lot of fun! It did work better on my R1200RT.
I did an errand today that required the top case (went to buy the BMW Venting Suit because we're getting some hot days now ). It was windy through some of the more mountainous areas and I could definitely tell that the top case was on there. The sideways gusts had a greater impact on my line than normal.

That being said, its not horrible and the capacity of the box outweighs the wind profile IMO.

My RT with the 2005-2013 49L top box...
Apr 10th, 2019 12:10 pm
TF1200RT
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by bandytales View Post
Hi Zamram. I too dislike my large BMW case. Why? because it looks ugly! It has such wasted space inside with it's false bottom and carpet. However, as for it being like a sail and being blown around..I have NEVER experienced that (well, not caused by the top box anyway).
I too think the OP should take a peek at the Shad expandable boxes.
The BMW 49L case that I have does not have carpeting and a false bottom (I know because I have taken it apart). And as far as it being a sail, try riding a K1300GT with a top case in a crosswind and not being two-up. Not a lot of fun! It did work better on my R1200RT.
Apr 10th, 2019 11:38 am
CWRoady
Re: Top Case Recommendations for 2010 R1200RT

Have you considered CraigsList? Here is one in my local Orange Coast, CA edition that clearly needs paint, but IMHO they need to be color matched anyway ;-) Not saying this is a great deal, just using it as an example that they do come up every now and then.

https://orangecounty.craigslist.org/...854044091.html
Apr 10th, 2019 10:31 am
Digtlartst
Re: Top Case Recommendations for 2010 R1200RT

I've put BMW's 28-liter case on my '06, '13, and '16 RTs. I painted their tops to match the bikes. It's well built but not heavy and is keyable to the bike, holds a helmet and more, looks great, makes a good passenger backrest, is not sensitive to side winds, and it doesn't block the rear view as the large case does. A box tail light isn't necessary to me since I always install supplemental LED tail/brake/turn lights.
Apr 10th, 2019 10:22 am
Hfjeff
Re: Top Case Recommendations for 2010 R1200RT

I ran a SHAD SH-48 on my FJR and was going to keep it when I decided to move on the the RT. But the used RT I ended up buying came with the factory topcase so I sold the SHAD. I had the optional backrest pad and my wife said it was fine for her on the FJR. It was good quality, held 2 medium full sized helmets, was quick and easy to remove, and looked pretty good. I ended up selling it.

I bought it brand new on Ebay from a dealer as an open box item and got it for around $150 shipped. Then the pad was additional. I did not add a light. As someone else mentioned you will need the SHAD adapter plate for the RT.
Apr 10th, 2019 10:14 am
jeffdean
Re: Top Case Recommendations for 2010 R1200RT

A top case from 1996 BMW is too old to fit a 2010 RT. However, the pre-2014 top cases (see photo below) do. I moved one from my 2007 RT to my new RT without difficulty, just repainting the lid to match the RT.



They have another advantage -- the large top cases cost about half what the newer BMW top cases cost. The small cases are the same from 2005 through 2019.

I disagree with "Bandytales." I think BMW top cases look like the belong on BMWs. I have yet to see an aftermarket top case that looks that way.
Apr 10th, 2019 9:49 am
bandytales
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by zamram View Post
I have a 2012 that came with the big BMW case. I think it is 41 liters. I hate the thing when riding solo it is like a sail you get pushed all over the road. It is nice if two up or a big dry bag behind the rider.

Sent from my SAMSUNG-SM-G891A using Tapatalk
Hi Zamram. I too dislike my large BMW case. Why? because it looks ugly! It has such wasted space inside with it's false bottom and carpet. However, as for it being like a sail and being blown around..I have NEVER experienced that (well, not caused by the top box anyway).

I too think the OP should take a peek at the Shad expandable boxes.
Apr 10th, 2019 9:34 am
Pappy53
Re: Top Case Recommendations for 2010 R1200RT

Givi you need the key to open it every time (it cannot be left unlocked) which also introduces the joy of accidentally locking your keys in the case.

Look at the Shad cases. I recently bought a 39 liter case for my 2013 and it looks great and is of excellent quality. I have a detailed post over at the BMWMOA forum. I'd provide a link but I'm not sure linking to other forums is permitted here.
Apr 10th, 2019 5:35 am
zamram
Re: Top Case Recommendations for 2010 R1200RT

I have a 2012 that came with the big BMW case. I think it is 41 liters. I hate the thing when riding solo it is like a sail you get pushed all over the road. It is nice if two up or a big dry bag behind the rider.

Sent from my SAMSUNG-SM-G891A using Tapatalk
Apr 10th, 2019 3:41 am
bandytales
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by North Woods Wanderer View Post

Could anyone tell me if a stock BMW top case from a 1996 1100RT would be compatible with my 2010 R1200RT?
No.
You wouldn't want it anyway. For such a large case it holds very little.



As for cases that do fit.

Most BMW cases from 2005 to 2019 RT's R's and RS's (and many K bikes),will fit (that is both the 28 liter and the large ones).


As for aftermarket cases, my current favourite are the variable size SHAD cases which expand vertically to allow you to stick more stuff in them.
Apr 10th, 2019 12:05 am
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

Thanks for that info TF 1200RT.
Apr 10th, 2019 12:04 am
North Woods Wanderer
Re: Top Case Recommendations for 2010 R1200RT

Quote:
Originally Posted by ebiss9 View Post
I just received the Givi V46 Monokey last Christmas, for my 2009 RT, and finally got it installed recently. Of course you have to get the compatible top case rack to mount it. I have the optional back rest pad for the wife, which you also have to install, and brake light. I modified it further to include additional brake lights and a blinking smart stop kit. But to answer your question, this was the best value for my money IMO. It holds two 3/4 helmets although one has to be turned sideways to fit. I have the original BMW 28 liter top case that looks decent but just didn't do it for me as far as available capacity, and the larger BMW case just cost too damn much for my older bike. I didnít want a larger top case than the V46 as I thought it may look out of place. There are also weight limitations as with any top case. I havenít done much traveling at distance or with it fully loaded so I canít tell you if it will make the bike feel top heavy or not. I think it does look good thoughÖÖ.
Thanks for that info ebiss9. I've looked at both the Givi Monokey and Monolock series cases, but haven't actually been able to examine any close up and in person. I agree that several of them look pretty good, including yours. I'm not sure if I want to go for a case that holds 2 full-face helmets or not. Kind of big but kind of a nice option to toss them in there. I wonder how much lighter weight the Monolock series is, as they are quite a bit cheaper.
Apr 9th, 2019 4:45 pm
ebiss9
Re: Top Case Recommendations for 2010 R1200RT

I just received the Givi V46 Monokey last Christmas, for my 2009 RT, and finally got it installed recently. Of course you have to get the compatible top case rack to mount it. I have the optional back rest pad for the wife, which you also have to install, and brake light. I modified it further to include additional brake lights and a blinking smart stop kit. But to answer your question, this was the best value for my money IMO. It holds two 3/4 helmets although one has to be turned sideways to fit. I have the original BMW 28 liter top case that looks decent but just didn't do it for me as far as available capacity, and the larger BMW case just cost too damn much for my older bike. I didnít want a larger top case than the V46 as I thought it may look out of place. There are also weight limitations as with any top case. I havenít done much traveling at distance or with it fully loaded so I canít tell you if it will make the bike feel top heavy or not. I think it does look good thoughÖÖ.
Apr 9th, 2019 3:01 pm
TF1200RT
Re: Top Case Recommendations for 2010 R1200RT

Will not fit.
Apr 9th, 2019 2:59 pm
North Woods Wanderer
Top Case Recommendations for 2010 R1200RT

Hello Friends.

Could anyone tell me if a stock BMW top case from a 1996 1100RT would be compatible with my 2010 R1200RT? I'm not sure how far back the mounting system on my bike goes back in the RT line. I know on many 3rd party cases the same case covers close to two decades of RTs, but wasn't sure about the original BMW cases. I'm looking at some used options from earlier years online but not sure if they fit. Anyone know of a reference chart that says what stock cases fit on what years?

As long as I'm on the subject, what are your favorite 3rd party top cases that would fit a 2010 RT? How many of your prefer NOT to use a top case on long trips and instead pack your bike across the luggage rack and rear seat with your own dry bags, etc.? That seems like it might be more efficient use of space. FYI, I'm a new BMW RT owner. In the past I loaded down my Suzuki SV650S with stuff. It wasn't pretty, but I made it work. My recent purchase of a used 2010 RT came without the top case. Buying a replacement from BMW is out of the question ($$$). Part of my debate about what to get revolves around whether I want the top case more for in town commuting and convenience (especially when my wife is along), in which case maybe I would not go for the largest one available, or whether I want the largest possible to be most useful when I take road trips.

I am not a person of unlimited funds, but I do want to get the right solution if I can afford it. The Shad 58l that adapts to two smaller sizes is pretty nice, but expensive - especially after you add in the back rest and brake light kit. A back rest is essential for use with a passenger (esp. my wife), and extra brake/running lights up high certainly seem like a good idea. I'm also looking at the GIVI cases currently.

Might anyone also tell me how much drag and/or turbulence is produced by some of these cases? I'm guessing there is some variation here by design as well as size, so any thoughts/experiences on that point would also be appreciated.

Thanks much!

North Woods Wanderer

2010 BMW R1200RT
2001 Suzuki SV650S

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome