|Topic Review (Newest First)|
|Jan 29th, 2007 6:28 pm|
It is my understanding that the 5 pin has a common ground for speakers and mic, the 7 pin has seperate ground for speakers and mic. This then leaves the question of why the 5 pin has 3 wires for the mike ???
|Jan 29th, 2007 3:43 pm|
M1 has 5 pin DIN plugs.
|Jan 29th, 2007 3:35 pm|
Originally Posted by rando
|Jan 29th, 2007 2:54 pm|
Thanks. What does "pwered" mic mean? not clear on that. IIRC, the pin out on the 5 pin DIN plug has a left, right and a common, leaving 2 more pins for the mic. Hmmmm, have to investigate further. I thought maybe an FRS headset might work. Of course, I guess I could be less of a tight wad and just BUY the right part. but part of the fun of motorcycles is making something myself.
I just thought it would be nice for them to TELL me before they fall off!!! LOL
|Jan 29th, 2007 2:08 pm|
'but they can't speak to me.'
And your problem is?
Joking aside I cannot offer any parts, but I do know that the mike is powered so standard mikes are no good. Hopefully someone will come forward or you could try ebay.
|Jan 29th, 2007 9:27 am|
I have an Autocom Pro M1 on my 03. Have two headsets in two helmets. Have two more helmets for kids and no headsets. I soldered up a headphone adapter so they have headphones and I can speak to them, but they can't speak to me. I would like to come up with a cheap headset alternative to put in their helmets so we can talk during a ride. especially if they need to stop or whatever.
Any ideas??? I know there has to be an alternative to the expensive autocomm headsets. No good local place to purchase autocomm stuff.