Join Date: May 2004
Location: Hazel Green, AL, USA
Re: Cruise Control
Aside from component failure, the three main causes of CC to not operate are the clutch interlock , brake interlock switches and the throttle rail "force off" switch. With the bike in a very quiet garage, move the clutch lever about 1/4 of the way in. You should hear a faint click after it has moved a bit. If not push it out and listen for the click. Same on the brakes, both foot and hand. If those are out near the relaxed positon then they need to be adjusted. If those are fine then roll the throttle past the relaxed state "force it OFF". You should hear that faint click down on the throttle rail. If you don't then add some slack to the closer cable.
2009 K1300GT Red Rocket
2009 R1200GS (Gone)
2005 K1200LT Ocean Blue Blue Wizard 110 K and counting...
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
Have ridden a Motorcycle in all 48
But lack DE, MA, RI and CT with the 2005 LT
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.