Join Date: May 2004
Location: Hazel Green, AL, USA
Just a little difference from the earlier alarm in how the turn signals are powered. You need to add the Green wire from pin 2 to the pin 10/pin 6 jumpered pair.
To get the bike running again you need to jumper the following pins on the 12 pin connector. Pin 3 (black/white/yellow) to pin 11 (black/yellow); this is the starter button signal to the starter relay. Then jumper pin 10 (green/violet, switched power) to pin 6 (blue/violet, engine electronics relay and also pin 2 (green, power to the flasher module).
2009 K1300GT Red Rocket
2009 R1200GS (Gone)
2005 K1200LT Ocean Blue Blue Wizard 110 K and counting...
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
Have ridden a Motorcycle in all 48
But lack DE, MA, RI and CT with the 2005 LT
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.