Re: k1200lt trunk latch plastic spacer
Nick, I just went out and pulled out my liner to take a look at it. No way to measure it directly with the tools I have but I did measure it indirectly. I measured from the top edge down to a metal ruler to establish the bottom edge against the top side of the spacer and set my caliper to 0.00 there. Then I removed the ruler and extended it down to the bottom edge under the spacer and came up with 1.47mm. It is probably 1.5mm but anything close to that should work.
Sugar Hill, GA
2001 K1200LTI – Champagne (current ride) Lazy Susan
1998 R1100RT – Never should have sold it
1974 Yamaha TX 750 Twin. Omni Phase Balanced
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.