Join Date: Apr 2008
Location: Nashville, TN, United States
Re: Can I install a VOICE II/CD on my 99LT
You should be able to with a little modification or purchase the harness $$$ from the stealer. Some where lurking in the forum is the wiring diagram that would be of great assistance. The reasoning for my thoughts are the basic (not changed) layout of the bike. As you have the BC3, most of the connections are there. I put a BC3 on my Y2K that did not have a comsystem, it too was complete. I did however have to power it up. Simple two wire power leads were made from the fuse box. As you have a "complete" system they should marry quite good. Once you get your old one off, you will know straight away if you need additional connections.
My only concern would be the RDU. I don't know why it would not work, but it could be an issue. Watch for battery drain as you are changing the hardware and the software may not be "completely" compatable.
'Stupidity has a knack of getting its way.' --Albert Camus
'05- K1200LT - Gretchen
R.I.P. - '00- K1200LTE- "Barbara" - Retired at 168K 9/2011
MOA, IBA, EXR & RCB and TMI