Re: NAV III and Nolan N102 helmet - Connectivity problem
I had the same problem. I found that there is two modes of Pairing. The first mode you get to, by holding down the Middle or Start button, starts the Vol up and down lights to flashing after about 7 seconds. If you continue to hold down the power button the lights will start to flash faster. Then try to pair the two. This worked for me. I then paired my GPS to the phone ( an iPhone just in case you were wondering) and everything connected fine. You want to make sure your phones BT is not on at the time your trying to pair the helmet to the NAV, as it will try and connect messing everything up.
Hope this helps.