BMW Luxury Touring Community banner

adjust brake pedal

6K views 7 replies 6 participants last post by  JayJay 
#1 · (Edited)
i lowered my footpegs with illium brackets...1" lower readjusted the shifter on the splines but need to adjust brake pedal ? any ideas on what to do?
 
#7 ·
By the by, it isn't necessary to un-clip the linkage. If you back off the jam nut you can simply turn the link, threading it into the clevis. There is a hex section at the top of the link for this purpose. It's just below the boot and is barely visible in the first picture of the cited post.

If you want to know the easiest way to do something, ask a lazy person.

I fit that description...

Tom
 
#8 ·
Like Tom - I just backed off the jam nut and turned the shaft. I did it without thinking about it like I've adjusted loads of other threaded linkages of various types. I wasn't being lazy, I just didn't know I wasn't supposed to do it that way.

JayJay
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top