Weep Hole Drilling Video - BMW Luxury Touring Community
 2Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 79 Old Apr 2nd, 2010, 7:40 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Weep Hole Drilling Video

Many of you at CCR last year saw the Weep Hole Drilling Video that Dan Sullivan and I put together at STC last April. I have added a few things that we were not able to film at the time and a few tool tips as well. The Video is broken up into three parts Weep A, B and C. "A" gets you to the slave. "B" covers drilling the weep hole and "C" takes you through reassembly of the bike.

Here is the links to each of the videos:
Weep A

Weep B

Weep C

They are still fairly large files 250, 140, and 201 Mb but a high speed connection should have no trouble. If there is some one out there that really needs this and has a slow dial up PM me for alternatives.


I also highly recommend you download Kevin Cook's instructions that we used during the filming. You can find them here:
Slave Drilling Procedure

I had fun doing this and have learned a bit about video editing at the same time. We plan to film a brake flush this year at STC and will include segments for the three brake variants on the LT. Hope you enjoy the videos.
bfree likes this.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
Sponsored Links
Advertisement
 
post #2 of 79 Old Apr 2nd, 2010, 8:19 pm
Senior Member
 
Join Date: Mar 2006
Location: West Milford, NJ, USA
Posts: 978
Re: Weep Hole Drilling Video

John, excellent job!

Of course, I still think you were cheating. I watched these diligently up to the point where you were breaking the pivot bolts loose. As you remember, that is what had me stymied a couple of weeks ago - I fought with the pivots, broke several sockets, trashed the 14mm heads and gave up for this riding season.

How the heck did you get these out so easily? It's a conspiracy!

Anyway, I'll try next off-season again. I took note of your hint about the flank-drive socket for the pivots - although I will have to use an easy-out on one that I mangled.

Also, I really liked your FD stand. That sure beats my method: laying under the bike, struggling with the FD, cursing profusely...

Thanks again.

Robert in Northern NJ

'09 R12GS, '03 R1150RT


Last edited by rdwalker; Apr 2nd, 2010 at 9:25 pm.
rdwalker is offline  
post #3 of 79 Old Apr 2nd, 2010, 9:42 pm
Senior Member
 
Family_fun's Avatar
 
Join Date: Mar 2009
Location: Cleveland, oh, usa
Posts: 202
Re: Weep Hole Drilling Video

Excellent video series! Takes a lot of the mystery out of that, and related jobs. Thank you very much!! Is there any chance you could give us some measured plans of both the seal depth installation tool and the Final Drive jig? Both look to be very helpful tools and I would love to have them in my tool box.

Thank you again!

I'd rather have a bottle in front of me, than a frontal lobobomy!
87 K100RS Tooling round town edition
01 K1200LT Luxo-Barge
83 Yamaha XJ Turbo Forced Air Futility
83 GPz 1100 Thrashed, Trashed & Crashed
74 Honda 500-4 Mad Max reincarnate
Family_fun is offline  
post #4 of 79 Old Apr 3rd, 2010, 4:30 am
Senior Member
 
myk_edwards's Avatar
 
Join Date: Apr 2004
Location: Gloucester, Gloucestershire, England UK
Posts: 1,474
Re: Weep Hole Drilling Video

Great job!

We need to get a tech session sorted here in the UK, and do one of these.

Rgds
Mike

"For those that know, no explanation is needed,
For those that don't, no explanation is possible."

2001 K12 LT Toscana Green AKA Baby Sh*t Green
Kawasaki EN500 - been sold on!
Hardtail Chopper ( Honda CB 500 engine) in a box still!
myk_edwards is offline  
post #5 of 79 Old Apr 3rd, 2010, 10:05 am Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

Quote:
Originally Posted by Family_fun
Excellent video series! Takes a lot of the mystery out of that, and related jobs. Thank you very much!! Is there any chance you could give us some measured plans of both the seal depth installation tool and the Final Drive jig? Both look to be very helpful tools and I would love to have them in my tool box.

Thank you again!
I think Dman made these pictures. You could actually make it out of plastic. My machinist friend just got a little carried away. The stand was thrown together from scrap pieces but let me see if I can at least do some rough dimentions on a drawing. Good idea.
Attached Thumbnails
Click image for larger version

Name:	P1060301.JPG
Views:	923
Size:	206.2 KB
ID:	26822   Click image for larger version

Name:	P1060304.JPG
Views:	733
Size:	203.1 KB
ID:	26823  

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene

Last edited by jzeiler; Apr 3rd, 2010 at 10:34 am.
jzeiler is offline  
post #6 of 79 Old Apr 3rd, 2010, 10:13 am Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

Quote:
Originally Posted by rdwalker
John, excellent job!


How the heck did you get these out so easily? It's a conspiracy!
Thanks Robert,

The part you could not see in the video is the grimace on my face as I was sweating bullets as I pressed on the breaker bar. These were all well oiled which is contrary to the manual that defines the torque value "dry". But they were not loose or overly tight.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene

Last edited by jzeiler; Apr 3rd, 2010 at 10:20 am.
jzeiler is offline  
post #7 of 79 Old Apr 3rd, 2010, 10:24 am
Senior Member
 
bowlesj's Avatar
 
Join Date: Jun 2005
Location: Glen Alpine, NC, USA
Posts: 1,431
Re: Weep Hole Drilling Video

Quote:
Originally Posted by jzeiler
I think John Bowles made these pictures. You could actually make it out of plastic. My machinist friend just got a little carried away. The stand was thrown together from scrap pieces but let me see if I can at least do some rough dimentions on a drawing. Good idea.

No, I can't take credit for the design or the posting of those pictures, that was Duane in Rapid City. But I used those specs to make mine and Jack's from hard plastic or Delrin as well. The plastic is good for preventing damage to the aluminum case.

Didn't watch the videos yet, I'm sure there great, John. Thanks for putting them together. And yes, the drive stand is simple and sweet.

John

2004 - LT - Anthracite
bowlesj is offline  
post #8 of 79 Old Apr 3rd, 2010, 12:40 pm
Senior Member
 
wa1200lt's Avatar
 
Join Date: Apr 2009
Location: Vancouver, WA, USA
Posts: 2,745
Re: Weep Hole Drilling Video

John, I watched the videos last night and found them to be extremely helpful. I will not be afraid to tackle this project now as long as I have a torque wrench capable of re-torquing the swing arm to 500+ nM's.

One observation: If you ever attend a tech session where one of these videos are taken STFU until the camera stops rolling! Otherwise you sound like a Goob and distract from the otherwise excellent quality of the video.

Thank you John for an informative, timely, and well done video!

Loren

WAK1200LT
Loren

Cave quid dicis, quando, et cui
wa1200lt is offline  
post #9 of 79 Old Apr 3rd, 2010, 2:09 pm
Lifetime Supporter
 
PMitchell's Avatar
 
Join Date: Aug 2006
Location: Hudson, OH, USA
Posts: 2,649
Re: Weep Hole Drilling Video

You mean like this?

pm
--
Life is too short to do anything
other than that about which you
are absolutely passionate . . .
Ride till you can't!

"Der Weg ist das Ziel"
Morocco!
South Africa!
Spain, Tuscany, Provence & Andorra in 2012
Greece Fall 2013

In July, to The Dolomites of Italy, Alps of Switzerland & Austria and returning to Milan via the "Gold Coast" of the French Riveria. http://share.shutterfly.com/share/re...=0UaOGTRy1Zu-g
'00 K1200LTC
'90 K75
'62 R 50/2 (Rode hard and put away wet)-Sold in '81
'63 Vespa 150 (1st and only dirt bike!) Sold in '67

PMitchell is offline  
post #10 of 79 Old Apr 3rd, 2010, 7:43 pm
Senior Member
 
Join Date: Jun 2007
Location: Lawrenceville, PA, USA
Posts: 3,904
Re: Weep Hole Drilling Video

Quote:
Originally Posted by jzeiler
Many of you at CCR last year saw the Weep Hole Drilling Video that Dan Sullivan and I put together at STC last April. I have added a few things that we were not able to film at the time and a few tool tips as well. The Video is broken up into three parts Weep A, B and C. "A" gets you to the slave. "B" covers drilling the weep hole and "C" takes you through reassembly of the bike.

...

I had fun doing this and have learned a bit about video editing at the same time. We plan to film a brake flush this year at STC and will include segments for the three brake variants on the LT. Hope you enjoy the videos.
I have watched the first two and am loading the third now. These are very helpful and I look forward to the future ones. Now if i just had a video on installing the GPS and CB radio as those are my next projects.

Now if you can just get your camera man (or woman) to move more slowly! I was getting seasick in a few spots!
:-)

2007 K1200LT, VOICE II, Navigator III+, Motorrad Communicator, K7MSW
http://www.bmwlt.com/photopost/showp...-visited&cat=3
Voyager is online now  
post #11 of 79 Old Apr 3rd, 2010, 7:58 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

Go easy on Dan. He had just bought that Flip camera and this was his first shot at filming. I'll set some rules for the Brake Flush we are doing on the 16th so hopefully it will come out a little bit better. Glad everyone is enjoying these.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #12 of 79 Old Apr 3rd, 2010, 8:18 pm
Senior Member
 
Join Date: Jun 2007
Location: Lawrenceville, PA, USA
Posts: 3,904
Re: Weep Hole Drilling Video

Quote:
Originally Posted by jzeiler
Go easy on Dan. He had just bought that Flip camera and this was his first shot at filming. I'll set some rules for the Brake Flush we are doing on the 16th so hopefully it will come out a little bit better. Glad everyone is enjoying these.
No offense intended, just a little ribbing. Having done a fair bit of video work myself, I know how hard it is to think about what the film will look like when you are filming it. I am sure that Dan will do things a lot different next time after viewing his first efforts. It just takes a little time and practice and he'll be shooting like a pro in now time.

Now if I just had a FTTH connection so that I didn't have to keep waiting for more of the video to load! I am about halfway through the last segment now...

2007 K1200LT, VOICE II, Navigator III+, Motorrad Communicator, K7MSW
http://www.bmwlt.com/photopost/showp...-visited&cat=3
Voyager is online now  
post #13 of 79 Old Apr 16th, 2010, 12:30 am
Junior Member
 
p429brad's Avatar
 
Join Date: Mar 2008
Location: Surprise, Az, USA
Posts: 18
Thumbs up Re: Weep Hole Drilling Video

John--GREAT JOB!! I was afraid to tackle this job, but with your excellant video--takes the worries away.

Phil Bradley
p429brad is offline  
post #14 of 79 Old Apr 16th, 2010, 1:56 am
Senior Member
 
Join Date: Mar 2005
Location: 39 30 38 N 2 32 43 E, ,
Posts: 1,858
Re: Weep Hole Drilling Video

Excellent, thanks for all the hard work.
simoncharles is offline  
post #15 of 79 Old Apr 16th, 2010, 11:32 am
Senior Member
 
Razmataz's Avatar
 
Join Date: Aug 2008
Location: Pesotum, Il, USA
Posts: 1,332
Re: Weep Hole Drilling Video

Quote:
Originally Posted by PMitchell
You mean like this?
That was funny, Paul. I don't know how some of you guys come up with stuff so quickly. RonK Miller must have a hard drive full of this stuff.

BMW 1200 LTC 2002



Illinois...The Only State Where The Governors Make The License Plates
Razmataz is offline  
post #16 of 79 Old Apr 16th, 2010, 9:28 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

Glad everyone is enjoying this. I got some good footage of the 2003 brake flush today at STC 2010 and tomorrow I'll get some of an early 2001 non-integral. Should have a three version flush video well before CCR. Working towards virtual tech sessions.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #17 of 79 Old Apr 17th, 2010, 8:58 am
Senior Member
 
Join Date: Jun 2007
Location: Lawrenceville, PA, USA
Posts: 3,904
Re: Weep Hole Drilling Video

Quote:
Originally Posted by jzeiler
Glad everyone is enjoying this. I got some good footage of the 2003 brake flush today at STC 2010 and tomorrow I'll get some of an early 2001 non-integral. Should have a three version flush video well before CCR. Working towards virtual tech sessions.
That is great, John. I appreciate your effort here and keep those videos coming!

Any plans to do one regarding installation of the CB Communicator? I just got mine and the instructions suck.

2007 K1200LT, VOICE II, Navigator III+, Motorrad Communicator, K7MSW
http://www.bmwlt.com/photopost/showp...-visited&cat=3
Voyager is online now  
post #18 of 79 Old Apr 29th, 2010, 11:00 am
Senior Member
 
Join Date: Aug 2002
Location: Indy, IN, USA
Posts: 438
Re: Weep Hole Drilling Video

Where and why and on what bike are we drilling weep holes for?

Grey 14 K1600GT
Red 94 R1100RSL
tonyn1 is offline  
post #19 of 79 Old Apr 29th, 2010, 12:17 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

If you watch the first video it explains it but here you go.


The chamber that holds the slave is not vented so if either the rear transmission input shaft seal or the slave start leaking the fluid fills the chamber and flows down the release rod and contaminates the clutch. The weep hole gives you an inspection point for discovery of the leak BEFORE the clutch starts slipping. Applicable to all LT models.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #20 of 79 Old May 5th, 2010, 8:56 am
Senior Member
 
Join Date: Aug 2002
Location: Indy, IN, USA
Posts: 438
Re: Weep Hole Drilling Video

Quote:
Originally Posted by jzeiler
If you watch the first video it explains it but here you go.


The chamber that holds the slave is not vented so if either the rear transmission input shaft seal or the slave start leaking the fluid fills the chamber and flows down the release rod and contaminates the clutch. The weep hole gives you an inspection point for discovery of the leak BEFORE the clutch starts slipping. Applicable to all LT models.
Looks like something I need to put on my "To Do" list. Don't want to have to get into replacing a clutch unnecessarily. What year models are we talking about? Did BMW figure it out and start doing this at the factory on later models?

Grey 14 K1600GT
Red 94 R1100RSL
tonyn1 is offline  
post #21 of 79 Old May 7th, 2010, 10:41 pm
Member
 
Join Date: Aug 2007
Location: Valley Falls, KS, USA
Posts: 50
Re: Weep Hole Drilling Video

I was needing to do this and dreading it. After watching the video I jumped right in and did my bike and was amazed at how much easier it was then I thought. Trickiest part for me was getting drive shaft lined back up to tranny. Thanks jzeiler!!!!
sodbuster is offline  
post #22 of 79 Old May 22nd, 2010, 9:04 am
Junior Member
 
Join Date: May 2010
Location: United States, United States, United States
Posts: 2
Re: Weep Hole Drilling Video

Looks like something I need to put on my "To Do" list. Don't want to have to get into replacing a clutch unnecessarily. What year models are we talking about? Did BMW figure it out and start doing this at the factory on later models?
__________________

http://www.lamartinaoutlet.net/]la martina clothing[/URL]
carlsmith is offline  
post #23 of 79 Old May 22nd, 2010, 11:18 am Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

No BMW has never acknowledged this procedure. It does not garantee a fail safe clutch either as there are engine and front transmission seals that come into play (this area was dry during my clutch change). All it does is give you an inspection port to see when either the slave or the rear input shaft seal are leaking so you can take steps to fix them before they take out the clutch.
The procedure is the same for all model years.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #24 of 79 Old Aug 17th, 2010, 9:33 am
Member
 
Join Date: Mar 2008
Location: Ottawa, ON, CA
Posts: 56
Re: Weep Hole Drilling Video

I have an 05 LT and have viewed these excellent video's and feel comfortable in tackling this job should it be necessary to change the seal at the same time. The question on my mind is if it necessary to do all this work to simply drill the weeping hole? I tend to think that one would have to move the hydrolic unit out of the way and the muffler bracket to get to the area where the hole should be drilled. Most likely this info exists but I don't have much luck searching this site.

Doug
Doug69 is offline  
post #25 of 79 Old Aug 17th, 2010, 9:51 am
Senior Member
 
wa1200lt's Avatar
 
Join Date: Apr 2009
Location: Vancouver, WA, USA
Posts: 2,745
Re: Weep Hole Drilling Video

For the clutch slave you pretty much have to follow the videos. In order to gain access to the clutch slave and to pinpoint the right place to drill the hole it all has to come off. Not such a bad job to do though. Just make sure you have the 30 mm window socket in hand before you start the job. Its a must have

Loren

Quote:
Originally Posted by Doug69
I have an 05 LT and have viewed these excellent video's and feel comfortable in tackling this job should it be necessary to change the seal at the same time. The question on my mind is if it necessary to do all this work to simply drill the weeping hole? I tend to think that one would have to move the hydrolic unit out of the way and the muffler bracket to get to the area where the hole should be drilled. Most likely this info exists but I don't have much luck searching this site.

Doug

WAK1200LT
Loren

Cave quid dicis, quando, et cui
wa1200lt is offline  
post #26 of 79 Old Aug 17th, 2010, 9:58 am
Senior Member
 
JPSpen's Avatar
 
Join Date: Jul 2005
Location: Jones, OK, USA
Posts: 3,525
Re: Weep Hole Drilling Video

I believe the swing arm is in the way and you just can't do it without taking the bike apart..

I would have if I could have gotten away with it...You can do the whole job by yourself in a day and a twelve pack....It's really not difficult, It's just a procedure...

John

Live and direct from the new earthquake capitol of the U.S. Jones, Oklahoma
08 Can-Am Spyder (Miss Lindy's)
03 R1200CLC Capri Blue "Flipper" (Tis But A Scratch !)
01 R1100RT Glacier Blue "Lucky"
91 R100GS "It'sNotAMoneyPit"
The voices in my head may not be real, But they have some good ideas!


"I like the wind in my face and Boobies on my back. No, Wait, I got that backwards"
JPSpen is offline  
post #27 of 79 Old Aug 17th, 2010, 11:15 am Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

Quote:
Originally Posted by Doug69
I have an 05 LT and have viewed these excellent video's and feel comfortable in tackling this job should it be necessary to change the seal at the same time. The question on my mind is if it necessary to do all this work to simply drill the weeping hole? I tend to think that one would have to move the hydrolic unit out of the way and the muffler bracket to get to the area where the hole should be drilled. Most likely this info exists but I don't have much luck searching this site.

Doug
You could drill the hole without removing anything major, but I don't recommend it since you don't have a good way to measure just where to drill it. You run the risk of damaging the slave or the rear seal on the tranny if you are off very much. Better to pull it all apart as often I find a weeping tranny seal when I am in there. No bad slaves yet though. Can be done in about 2 hours if you have the right tools and nothing goes wrong.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #28 of 79 Old Oct 24th, 2010, 3:38 pm
Junior Member
 
Join Date: Oct 2010
Location: sanford, fl, usa
Posts: 2
Re: Weep Hole Drilling Video

If you have a leak in the clutch, fluid has to go somewhere. I saw the videos and it took the scariness out of getting to the slave Thanks so much. However when I took the slave off there was not enough fluid to make up for what was gone from the reservoir.
Where else would it leak and would I see it show somewhere?
Sorry if this sounds like a novice question this is my first bmw had if for a week and already having clutch issue on first real check out drive. had to drive it back home about 70 miles without a clutch, oh what fun!!
My question is this where could the fluid go?
If it gets by the shaft seal at the clutch slave I obviously replace the seal but do I have to get to the clutches to get the fluid out of there? I will also replace the slave or should I? How do you know for sure its bad?
I hope I explained my dilemma correctly! Any help would be greatly appreciated.

Willie
2000 K1200LT 56k miles
pld123 is offline  
post #29 of 79 Old Oct 24th, 2010, 4:00 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

If the fluid was brake fluid then the slave should be changed as well as the oil seal in the transmission. If it was oil from the transmission and it got on the slave, the slave should be changed as the fluids and seals are not compatible. If you pulled the release rod out and there was no fluid on it then you main leak is else where. Either along one of the lines or at either end.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #30 of 79 Old Oct 24th, 2010, 5:01 pm
Member
 
wvandennoort's Avatar
 
Join Date: Apr 2002
Location: Oak Ridge, NJ, USA
Posts: 87
Re: Weep Hole Drilling Video

John,

Thanks for taking the mystery out of this procedure. Now to add this to the to-do list.

Bill Van den Noort
2000 K1200lt
Bmw Moa#96083
Bmw Ra #31818

wvandennoort is offline  
post #31 of 79 Old Oct 24th, 2010, 5:02 pm
Junior Member
 
Join Date: Oct 2010
Location: sanford, fl, usa
Posts: 2
Re: Weep Hole Drilling Video

Thanks for the reply! There was some fluid in the slave cylinder hole when I pulled it out but the shaft didn't really seem wet. The fluid didn't have a smell that I could tell. Though I did think I smelled tranny fluid somewhere, when I put my finger in the fluid and tried to smell it I got nothing I could tell.
I found the slave cylinder for it on the beemer bonyard site but can't find the seal.
Do you know a good place online I can order it from?
Thanks a lot I really appreciate the help
So glad there are places like this to get help with these things!!

Willie

Last edited by pld123; Oct 24th, 2010 at 7:51 pm. Reason: change wording
pld123 is offline  
post #32 of 79 Old Oct 24th, 2010, 8:18 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

The two on-line Dealers I have used are Chicago BMW and Max BMW.


Part number is:
23127705085 SHAFT SEAL, DRIVE SHAFT - 17X28X70.01 1 $13.05

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #33 of 79 Old Oct 25th, 2010, 12:09 am
Senior Member
 
lesn's Avatar
 
Join Date: Apr 2007
Location: new berlin, wisconsin, usa
Posts: 338
Re: Weep Hole Drilling Video

What would a novice, such as my self do--without people like you?
Your work and video much apreciated!!!
lesn is offline  
post #34 of 79 Old Nov 9th, 2010, 10:04 am
Junior Member
 
williebd62's Avatar
 
Join Date: Oct 2010
Location: Sanford, Florida, U.S.
Posts: 2
Thumbs up Re: Weep Hole Drilling Video

Well I got her all back together and so far so good. I used the video's to disassemble and replace the seal and slave and also of course drill the weep hole. That was a scary part worrying about the right placement of the hole. There was a bit of yelling between my son and I when we reassembled it. The drive shaft and final drive where the bears but that was mainly due to no visibility. Thanks to the little hints on the video though like the rag under the shaft as you put the final drive yoke/shaft into the drive shaft and indexing it. We made our own tool for the torquing part. Bleeding the clutch was the last thing and not sure if we got it right but we found the bleeder on the right side under the bottom half of the tubberware. didn't have a bleeder valve to screw into it so we just used a pin to depress the little bearing and it started to work. Bleeding it like we do brakes pumping the clutch lever a few times and pushing the bearing in to release the pressure. It took a few times but its working.
One thing we did mess up is the heater wires for the left handle grip! Anyone familiar with replacing the heated grips?
Anyway I wish to thank the people on this forum for all the info you give! fi I meet anyone that helped me in the future I owe you a beer!
Now if it would just heat up a tiny bit so I can get some more seat time life will be as it should be!!

Willie

2000 K1200LT BMW New to me
1983 GLS 1000 Suzuki sold 14 yrs ago
1979 750 Yamaha sold 16 yrs ago
williebd62 is offline  
post #35 of 79 Old Feb 5th, 2011, 8:48 am
Senior Member
 
gunny's Avatar
 
Join Date: Aug 2003
Location: Kings Mountain, NC, USA
Posts: 3,067
Re: Weep Hole Drilling Video

Quote:
Originally Posted by myk_edwards
Great job!

We need to get a tech session sorted here in the UK, and do one of these.
Help one of us out with the air fare and I, for one would be glad to put on a tech session with you folks.

B D R
gunny is offline  
post #36 of 79 Old Feb 25th, 2011, 10:42 pm
Senior Member
 
johnT's Avatar
 
Join Date: Oct 2004
Location: Under a Rock, , USA
Posts: 545
Re: Weep Hole Drilling Video

John,
awesome video. my bike is apart for winter maintenance/valve check/new shocks.. etc.
good excuse to drill the weep hole.
the video was a nice guide. great quality and liked the additional edits.

the only critism is the chit chat in the background. I do realize it was a public gathering... but it was distracting none the less.

again, awesome video....
if done in a quite environment, I believe you could sell these videos.
I think they are much better than other bmw tutorial videos I have seen in the past.


True Wisdom Only Comes From Pain.

johnT is offline  
post #37 of 79 Old Jun 19th, 2011, 8:09 am
Member
 
Join Date: May 2011
Location: , ,
Posts: 33
Re: Weep Hole Drilling Video

Whenever I click on the video links I just get a blank screen ... Are they still available???

Italos is offline  
post #38 of 79 Old Jun 19th, 2011, 11:34 am Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

I just checked and they open up into a media player on my computer. Try a "right click" and "save as..." to down load it to your machine. Then you can sort out what you might need to view the file.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #39 of 79 Old Jun 20th, 2011, 7:25 pm
Member
 
Join Date: May 2011
Location: , ,
Posts: 33
Re: Weep Hole Drilling Video

Can't right click and save as ... but right clicking and opening in a new window worked!

Thanks!


2006 K1200LT Ocean Blue and Gray (current)
2002 K1200LT (totaled)

Italos is offline  
post #40 of 79 Old Aug 12th, 2011, 3:05 pm
Junior Member
 
Join Date: Aug 2005
Location: , ,
Posts: 7
Re: Weep Hole Drilling Video

Quote:
Originally Posted by rdwalker
John, excellent job!

Of course, I still think you were cheating. I watched these diligently up to the point where you were breaking the pivot bolts loose. As you remember, that is what had me stymied a couple of weeks ago - I fought with the pivots, broke several sockets, trashed the 14mm heads and gave up for this riding season.

How the heck did you get these out so easily? It's a conspiracy!

Anyway, I'll try next off-season again. I took note of your hint about the flank-drive socket for the pivots - although I will have to use an easy-out on one that I mangled.

Also, I really liked your FD stand. That sure beats my method: laying under the bike, struggling with the FD, cursing profusely...

Thanks again.
Hi don't feel bad happened to me on my LT had to drill it out .came up with a solution for the next time , made a special socket that fits over the hex and rides on the diameter of the bolt . more or less took a sleeve and weled it to a 14 mm socket helps to keep the socket on the hex Interested? Dennis.
dad659 is offline  
post #41 of 79 Old Aug 12th, 2011, 3:16 pm
Senior Member
 
johnT's Avatar
 
Join Date: Oct 2004
Location: Under a Rock, , USA
Posts: 545
Re: Weep Hole Drilling Video

Quote:
Originally Posted by dad659
Hi don't feel bad happened to me on my LT had to drill it out .came up with a solution for the next time , made a special socket that fits over the hex and rides on the diameter of the bolt . more or less took a sleeve and weled it to a 14 mm socket helps to keep the socket on the hex Interested? Dennis.
got a picture?

True Wisdom Only Comes From Pain.

johnT is offline  
post #42 of 79 Old Oct 5th, 2011, 5:37 am
Junior Member
 
usafmsc's Avatar
 
Join Date: Mar 2003
Location: , ,
Posts: 12
Re: Weep Hole Drilling Video

John, thanks for the awesome vids. v/r emc
usafmsc is offline  
post #43 of 79 Old Feb 21st, 2012, 11:12 am
Member
 
starvingdrummer's Avatar
 
Join Date: Jun 2005
Location: Santa Rosa, CA, USA
Posts: 68
Re: Weep Hole Drilling Video

Quote:
Originally Posted by wa1200lt
For the clutch slave you pretty much have to follow the videos. In order to gain access to the clutch slave and to pinpoint the right place to drill the hole it all has to come off. Not such a bad job to do though. Just make sure you have the 30 mm window socket in hand before you start the job. Its a must have

Loren

Ok I'll bite, where do I get a 30mm 'window' socket? Or do I make one? You'rs looked like da bomb!

Kevin

2015 BMW K1600GTL (current ride)
2012 BMW K1600GTL
2008 BMW K1200LT
2000 BMW K1200LTC
1999 BMW R1150RT
1998 BMW R1100RT
1997 BMW R1200C (2)
1996 BMW R1100R
1995 BMW R850R
1994 HD Road King
1993 HD Fat Boy
1991 HD Dyna Wide Glide
1990 Ducati Monster
1988 Triumph Speed Triple
1986 Yamaha Vision
1986 Honda 1000 Interceptor
1985 Motto Guzzi Le Mans Mk IV
1983 Honda Sabre V65
1980 Kawasaki 400LTD
starvingdrummer is offline  
post #44 of 79 Old Feb 21st, 2012, 12:06 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

You can order the tool from BMW $$$$$$. Buy a 30 mm socket (< $15)and have a machine shop cut the opening or do it yourself with a cut off tool (or dremel with a carbide cut off disc). I had access to a friendly machinist for mine.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #45 of 79 Old Apr 1st, 2012, 9:11 pm
Junior Member
 
Join Date: Jun 2009
Location: Concord, NC, USA
Posts: 29
Re: Weep Hole Drilling Video

Quote:
Originally Posted by jzeiler
No BMW has never acknowledged this procedure. It does not garantee a fail safe clutch either as there are engine and front transmission seals that come into play (this area was dry during my clutch change). All it does is give you an inspection port to see when either the slave or the rear input shaft seal are leaking so you can take steps to fix them before they take out the clutch.
The procedure is the same for all model years.
Oh how I thank you Mr. Zeiler. I just found this thread and have not visited the videos yet. But I was wondering if this procedure also works on K1100 LT's - specifically a 1993.

I will do this procedure on my K12 but my K11 already has a slipping clutch and I have not had the time to get into it.

Thanks in advance
Jonny Oliver
Concord, NC
joliver is offline  
post #46 of 79 Old Apr 1st, 2012, 9:30 pm Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

Can't say for sure as I am not that familiar with the 1100. If it is already slipping this does you no good any way. This is just a way to keep an eye on slave condition and hope fully catch it before it becomes a problem.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #47 of 79 Old May 7th, 2012, 4:13 am
Member
 
NCCCC1's Avatar
 
Join Date: Jan 2012
Location: Braidwood, IL, USA
Posts: 80
Re: Weep Hole Drilling Video

What per centage of LT's at which mileage would you guess would fall prey to such clutch destroying issues? If you don't mind. Greg.

'00 BMW K 1200LT, Basalt Grau with Shark tones. My Only bike at present. 34K miles on it. Bought used in Oct. 2011.
BMW MOA# 180321
NCCCC1 is offline  
post #48 of 79 Old May 7th, 2012, 11:03 am Thread Starter
Wrencher Extraordinaire
 
jzeiler's Avatar
 
Join Date: May 2004
Location: Hazel Green, AL, USA
Posts: 10,549
Re: Weep Hole Drilling Video

No definative data. All this does is give a leaking slave cylinder some where to dump the fluid besides into the clutch. If you use it as a preventative measure then you need to inspect the hole periodically for evidence of leakage. At least when you perform the procedure you will see the condition of the slave and the rear tranny input shaft seal.

Prior to this there was a recommendation to replace the slave @ 60K. This was one engineer's idea based on the small diameter throwout bearing. The failure of this bearing will cause the slave cylinder piston to spin and destroy the seal. BMW, of course, says nothing on the matter.

John
2009 K1300GT
2009 R1200GS (Gone)
2005 Ocean Blue Blue Wizard
2006 Bushtec Turbo+2 Spell
2004 330 Ci Convertable
K4AN


CCR 06 Braselton CCR 07 Osage Beach CCR 08 Midway
CCR 09 Rapid City CCR 10 Killington, VT,CCR 11 Boise, CCR 12 Duluth
CCR 2013 Bend, CCR 2014 Backyard! CCR 2015 Couer d'Alene
jzeiler is offline  
post #49 of 79 Old May 7th, 2012, 7:50 pm
Member
 
NCCCC1's Avatar
 
Join Date: Jan 2012
Location: Braidwood, IL, USA
Posts: 80
Re: Weep Hole Drilling Video

I think that I'll make that hole drilling a project for next winter. You obviously have quite a respect for these machines. Knowing as much about them as you clearly seem to, it is quite an advantage to the rest of us to get this much of your personal, "recreational" time. Thanks again, Greg.

'00 BMW K 1200LT, Basalt Grau with Shark tones. My Only bike at present. 34K miles on it. Bought used in Oct. 2011.
BMW MOA# 180321
NCCCC1 is offline  
post #50 of 79 Old May 7th, 2012, 10:14 pm
Junior Member
 
don2470's Avatar
 
Join Date: Apr 2012
Location: Baltimore, MD, USA
Posts: 4
Red face Re: Weep Hole Drilling Video

I am a mechanic by trade on cars, trucks and heavy equipment. Novices should take note of some great work habits in these videos. Cleaning and inspecting the surfaces of parts for possible signs of trouble or other issues is one of the nicest things featured in the videos. He doesn't bring alot of attention to it, but stops and examines each part during disassembly.This gives you time to gather needed parts, and be confident when it's reassembled that it's road worthy. If you don't take the time to do it right, you will be making the time to do it twice! Proper torques and lube applied only where (and as much as) needed also. Very entertaining. I appreciate the tip regarding the valve grinding compound to "tighten up" a slightly sloppy hex head. Thanks!
don2470 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the BMW Luxury Touring Community forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Drilling the weep hole. joevano K1200LT 13 Nov 15th, 2012 11:41 am
Q's about Weep Hole in Tranny Housing (not the slave cyl weep hole) Toolman K1200LT 1 Jun 9th, 2009 11:18 am
Drilling the clutch weep hole jonny65 K1200LT 6 Jun 15th, 2008 9:55 am
Is it time to start drilling TWO weep holes? Dean_BMW K1200LT 10 Dec 5th, 2007 5:29 pm
First time Slave weep hole drilling bigbear K1200LT 0 Apr 10th, 2007 1:19 pm

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome