PDA

View Full Version : Does anyone have the wiring diagram for the signal lights


ctraylor
Sep 27th, 2009, 5:29 pm
My left signal light is inop, does anyone have the schematic for this and can you email it to me?

Dick
Sep 27th, 2009, 5:35 pm
My left signal light is inop, does anyone have the schematic for this and can you email it to me?
I know you had a coupla earlier posts that may have had your scoot's model year listed, butt you might wanna repeat that info again.

I've got the electrical schematic for '99 LTs, and if you have a '99 - '02 model, you may be able to use it. The schematics are large page foldouts and difficult (for me, at least) to put in an email. I'd be glad to send you mine to use for as long as needed, then return it to me. It's been to Finland, and to a coupla stateside locations, butt is still in great shape. Just send me your snail mail addy by PM and I'll send it first thang Monday.

Randy
Sep 27th, 2009, 6:05 pm
Here you go. This is for 1999-2001, but the later bikes are the same for turn signals.

H9030 is front left
H9040 is front right
H9035 is rear left
H9045 is rear right
A9020 is the flasher unit

Colors:
BR=Brown
BLRT=Blue/Red
BLSW=Blue/Black

Both the front and rear as well as the dash indicators are driven by the same outputs from the flasher unit. If you only have one lamp out, it is likely at that socket/bulb. If all three are out on one side, it is likely the flasher unit, but could be the handlebar switch. .

ctraylor
Sep 27th, 2009, 6:24 pm
I know you had a coupla earlier posts that may have had your scoot's model year listed, butt you might wanna repeat that info again.

I've got the electrical schematic for '99 LTs, and if you have a '99 - '02 model, you may be able to use it. The schematics are large page foldouts and difficult (for me, at least) to put in an email. I'd be glad to send you mine to use for as long as needed, then return it to me. It's been to Finland, and to a coupla stateside locations, butt is still in great shape. Just send me your snail mail addy by PM and I'll send it first thang Monday.

I am sorry it is a 99 model.

ctraylor
Sep 27th, 2009, 6:27 pm
Here you go. This is for 1999-2001, but the later bikes are the same for turn signals.

H9030 is front left
H9040 is front right
H9035 is rear left
H9045 is rear right
A9020 is the flasher unit

Colors:
BR=Brown
BLRT=Blue/Red
BLSW=Blue/Black

Both the front and rear as well as the dash indicators are driven by the same outputs from the flasher unit. If you only have one lamp out, it is likely at that socket/bulb. If all three are out on one side, it is likely the flasher unit, but could be the handlebar switch. .

I know the bulbs are good because the emergency flashers all work and that is the same circuit I think. Can you tell me which is the switches?

Randy
Sep 27th, 2009, 6:53 pm
I know the bulbs are good because the emergency flashers all work and that is the same circuit I think. Can you tell me which is the switches?
S9070 is the left multi function switch assembly
S9080 is the right multi function switch assembly
S9073 should be the left turn signal switch (blue-brown)
S9082 should be the right turn signal switch (blue-yellow)
S9085 is the cancel switch (brown-white)

All of the switches go to ground - grounding the blue-brown should trigger the left turn indicators and blue-yellow the right.

ctraylor
Sep 28th, 2009, 8:21 am
Thanks guys for all your help.