PDA

View Full Version : 05 EH Centerstand Actuator Motor


bvclark
Aug 23rd, 2009, 12:04 pm
My Centerstand light is flashing normally but centerstand motor is not making any noise. I pulled the motor the shaft turns freely so I put voltage directly on the terminals and the motor does not spin. Should it or is there a capacitor or motor starter or something else I should be looking for?

Thanks

pozo_izquierdo
Aug 23rd, 2009, 12:47 pm
You obviously need to open the motor and check the brushes and the collector. Check the following link if it gives you any help:

http://picasaweb.google.fi/pozoizquierdo/HYDRAULICCENTERSTANDOVERHAUL#

Regards

bvclark
Aug 23rd, 2009, 1:16 pm
So the motor should spin if i hook it directly to the battery?

Thanks for the info.

bvclark
Aug 23rd, 2009, 7:06 pm
The pictures were very helpfule. I got it cleaned up and after a couple of tries it is working great.

Thanks again