Mounting hardware options

[MattyK]

Hi guy's

I am looking for some hardware to mount a serius radio. I like the looks of the RoadyHolder and I think I could modify it to fit the serius. Has any one else had any luck with that. I would rather mount it on the clutch side, but the handle bar cover on the brake side has some natural openings that would allow for cable routing.

Thanks!

[eatanner]

Which model do you have? I've mounted both the Audiovox and a Sirius Sportster unit on my BMR shelf via the corresponding mounts. Works well for me. I didn't like having anything mounted on the handlebars since it distracted me from seeing the mirrors.

[Jerrym]

I ordered the RoadyHolder, which worked fine but I felt the radio set to far to the left. It blocked the left mirror a little. I used it for a pattern and took a piece of 16 ga. steel and made a different one moving the radio to the right one inch. I also bent it so the radio set level. I show a pic of the original mount and the one I made.

Jerry

[MattyK]

Edgar... It is a Streamer GT. I prefer mounting it on the handlebar for easier access, but that is a good point about the mirror thing. I'll have to give that some more thought.

Jerry... Thanks for the info & the offer. I may PM you this evening when I have some more time.

[ka0mlh]

i got ahold of http://www.cyclegadgets.com they told me that all the roady acc. that they have work with the streamer gt just my two cents worth.

[DanMartin]

You might try something like this. It is a piece of 1/8" x 2" aluminum stock attached to the top of the brake reservoir with some spacers and longer screws.

Dan Martin
Houson, Tx

[Jerrym]

Martty,

This is the RoadyHolder I have for the clutch reservoir with the screws and spacers.

Jerry