PDA

View Full Version : I have to remove my front seat...


nctarheels
Jun 10th, 2008, 7:19 pm
It is a heated front seat, how much tupperware do I have to take off to find where the connection from the seat is attached to the wiring harness? It is a 2005 LT

SilverBuffalo
Jun 10th, 2008, 7:25 pm
The seat heater wire has a connector plug that is probably "zip tied" to the frame
just under the side panel near the left front of your seat,

I was able to loosen the back of that panel,
wedge a maglite flashlight behind it
and pull/twist the zipties of the frame with longnosed needlenose pliers.

Duane_in_Florida
Jun 10th, 2008, 7:37 pm
Hans is better than I am....I had to pull the panel to get to the stupid zip tie to get the wire loose.

Btw, when finished I did tie everything back to the frame (with the plug wire now accessible) in order to keep things neat.

nctarheels
Jun 10th, 2008, 7:58 pm
Thanks Hans!! Your way worked, seats are swapped!