Reverse interlock

[cuffer101]

The reverse interlock on my 2005 LT won't let my bike start. Does anyone know how to fix or make it none functioning??. Thanks Chuck

[jzeiler]

If you remove the tupperware there are two micro switches at the end of the reverser shaft. Check those for proper operation. If you want to bypass the interlock temporarily, apply a ground to the bike side of the connector on the pin with the Brown/Green/white wire. That one feeds the ground side of the starter relay. But I would recommend fixing the fault by adjusting the switch associated with that wire ( switch side it is the brown, black/green pair ).

[cuffer101]

Are you talking about where the wires run to it?? I have the tupperware off. The only thing I see is the wires running near the side of the reverse rod. Chuck

[jzeiler]

If you follow the shaft for the reverser knob all the way back to the side of the transmission, you will find the two micro switches there. They are in item 8 in the picture. Follow the wires down to the connector.

[cuffer101]

Thanks alot, I'll give that a try tomorrow morning. Thanks again. Chuck