PDA

View Full Version : On board computer information


RealWing
Feb 22nd, 2008, 4:36 pm
The following is the info I read out on my LT when I got the GS-911. I was able to read the information on 3 separate modules.

Maybe others can post their info and we can see what if any software changes that BMW have made to the Motronic engine controller or ABS systems.

MOTRONIC MA2.4
Motorcycle Variant:K1200LT 85kW
BMW Part Number:7695591
Bosh Part Number:0261208140
ECU Software Number:1037374821
ECU coding variant:1
ECU program version:17010400
Manufacturer: Bosch


INTEGRAL ABS
BMW Part No.:07681915
Hardware Version No.:18
Manufacturing date(YYYY/mm/dd):2005/12/09
Software Version:5.1.6
Manufacturer: FTE
Part No.:37012057
Serial No.:15678
Host date(YYYY/mm/dd):2003/02/17
Control computer date(YYYY/mm/dd):1999/09/10
Control computer version:V01.63
EPROM version:64
Control computer ROM checksum78



ABS-N
Part No.:076819151800
HW Version No.:0
Coding Index:0
Diagnostic Index:107108
Manufacturer: Nippon
Manufacturing Date:1209-40-05
Software Version No.:6

Zotter
Feb 22nd, 2008, 4:48 pm
Cool - what else does that there thingamabob tell ya? Actual error codes? Plain english messages? Sell me on this puppy <g>

RealWing
Feb 22nd, 2008, 5:14 pm
Cool - what else does that there thingamabob tell ya? Actual error codes? Plain english messages? Sell me on this puppy <g>

You- actual error codes plus real english translations!!!! These are a couple that came up when I connected the GS-911


GS911 Version:705.7 Date:02/22/08

821: Hall sensor 1, no signal - this fault will always occur if engine not running or engine not cranked before reading Fault codes.
This fault occured 0 times.
The fault is currently present.

901: Hall sensor 2, no signal - this fault will always occur if engine not running or engine not cranked before reading Fault codes.
This fault occured 0 times.
The fault is currently present.

RealWing
Feb 28th, 2008, 5:16 pm
Has anyone out there read out their engine and ASB status using the GS-911? If so, can you post the results like I did in the original post?

I'm interested in software revisions

Zotter
Feb 28th, 2008, 10:23 pm
OK - now that is cool. Looking further. thanks!

Price is within reach too:
1,695.00 ZAR = 223.335 USD