R-GS Multi Light Bar Kit

[EzyMount]

Production order submitted today. :thumb:

Should have kits ready for packaging by 1st week of January.

I have decided to offer bar in both Clear Annodized and Black (Semi-G) Powdercoat finish.

This kit will mount to all GS models, 1100 thru 1200GS/GSA and replaces the older round two-piece version.

I will probably release pricing this weekend, as some kit hardware pricing is still TBD & no, I have not taken any more pics yet, must wait until my proto bar is coated and will have to remount lights on all four bikes for new pics, then I will post them on my website...

CANBUS adapter & Factory Aux Light Bracket relocation kit will be extra cost options.

[EzyMount]

R-GS Multi-Fit, Multi-Light Bar Kit: :bmw:

Includes H/W to install to R1100, R1150, R1200GS/GSA Models

Clear Annodize = $146.95

Black Powder.. = $158.95

(note-Black Powder version has clear annodize base coat applied before final Poly / UV safe Powder is applied)

Options:

CANBUS S-Pwr I/F Kit = $18.95

1200GSA Factory Aux Light Bracket RE-Mount kit = $10.95

[EzyMount]

My website will have the new pictures and other information posted within the next day or so, in the 'What's New' section. :D

I have passed everything to my webmaster for the updates, so when she gets it done, it will be there.

Thanks for all of your inputs and questions. :thumb:

[EzyMount]

Web page has been updated.

Go to What's New ! (http://www.ezymount.com/kits/whats_new.htm)

[EzyMount]

Visited shop just before Christmas to see progress.. :(

Not as far along as I would have liked, but back-order of T6 stock was partially to blame.

Final s/w updates had been put into computer and finalized.

Good news was, most of the Boot-Clamp sets have been completed and await final cut. (most difficult part of job)

Main bar cutting/shaping begins on the 2nd of January. ;)

Kit H/W will be in sometime next week.

Packing/shipping material has already been delivered.

Half of production run is spoken for, as of just before Christmas.

If you are interested and want to make sure you are in on the first run, take another look at http://www.ezymount.com/kits/whats_new.htm

and send an email to info@ezymount.com, to reserve a kit.

I have not priced shipping costs to Canada or Europe yet, those charges will obviously be higher. When I am able to establish those numbers, I will let you know.

Hope you all had a Merry Christmas and get the New Year off to a great start this evening, unless this catches you after midnight, if so

Happy New Year ! :bmw:

[EzyMount]

Some additional pics of R1150GS w/510's installed, will be added by Monday morning to :

http://www.ezymount.com/kits/whats_new.htm

After some minor cosmetic and fitment enhancement changes have been made and tested, final production effort is underway. Expect kits to be ready for coating shops end of next week. If that schedule stays on track, then kits will be ready for packaging in about 2 weeks, or on/or about Feb. 1.... :rolleyes:

[EzyMount]

Bar kits in for clear coat today, should be in shop for final powdercoat sometime next week.

That will put us on schedule for end of month shipping, for all kits. :rolleyes:

Clear kits will be available first, so when they are ready, I will put them up on website, as available for purchase. Hopefully that will be end of next week. :bmw:

[EzyMount]

Bar kits into powdercoat shop on Monday. Bad news is, due to a production issue, there will not be a clear version available from this production run. Only had one reservation for clear and I appologize for further delays on the clear kit. I expect to have components back by end of week (Jan 31) for packaging and shipment.

[EzyMount]

Will have bars back from powdercoat shop Tuesday evening. Everything will be available for pack/ship by Thursday evening of this week. Will have everything on Website by Thursday evening of this week. :o

I will notify those with reservations via email or PM, as required. :)

Thanks for your patience..