PDA

View Full Version : Roady2 Mount

N3xuS
Nov 19th, 2005, 9:15 am
I'm unsure what I should get to mount my XM Roady2 on the K1200LT. There are several mounts to choose from and I'm unsure what would be the best. Thanks for any input.
SilverBuffalo
Nov 19th, 2005, 8:13 pm
Probably the best advice would be to do a search on the old site.
There are many innovative and clever ideas that have been discussed.
I mounted mine by glueing the swivel mount just above the radio display.
motorhead
Nov 20th, 2005, 2:21 am
I like mine right above the factory radio. Easy to adjust stations while looking uncluttered.

JMHO.
Scott
S2DOG
Nov 20th, 2005, 9:17 am
I used a RAM mount over the brake resivour. It brings the unit closer to you. Looks nice too. I can take aphoto if you request it..... well.... if I can find my digital camera :D
N3xuS
Nov 20th, 2005, 4:31 pm
Would you take a pic please, I would appreciate it very much. Is this it, I have been looking at this one. http://motogear4you.com/mcart/index.cgi?code=3&cat=4
Thanx
S2DOG
Nov 20th, 2005, 6:10 pm
Would you take a pic please, I would appreciate it very much. Is this it, I have been looking at this one. http://motogear4you.com/mcart/index.cgi?code=3&cat=4
Thanx

Yes! That's the brake cover and you will need the "short" ram clamp and the mount for the Roady2. Then your set! :cool:
I still have to find my camera though.....?? :confused:
Don't know where it is....?? :(

When it turns up, I'll send a picture :)
allenbenitez
Nov 20th, 2005, 6:43 pm
Check out this link. I have the right side BMW Offset model. It clears the stock windshield.

http://www.hoonhardware.com/RoadyHolder/RoadyAlts/roadyalts.htm
S2DOG
Nov 20th, 2005, 7:27 pm
Check out this link. I have the right side BMW Offset model. It clears the stock windshield.

http://www.hoonhardware.com/RoadyHolder/RoadyAlts/roadyalts.htm

I mounted mine in a similar fashion. I'll have to get a pic soon....
docwagner
Nov 20th, 2005, 10:37 pm
Here's my set up. I use the Hoon offet mount.
http://www.bmwlt.com/gallery/showimage.php?i=546&c=3&userid=7846
N3xuS
Nov 22nd, 2005, 6:12 pm
Thanx Doc I ordered the Hoon this morning, helluva lot less money than the Ram setup. Thanx everyone for your help.
RaffyK
Nov 22nd, 2005, 6:17 pm
For the record, RAM does not make that setup. One of our members does and the unit uses the RAM ball (the only RAM component). It costs more because of the machining involved in making them.