It's a Bleedin Flush Party

[munson]

Thanks Bo for providing space, and Bob for the expertise, and Dan for looking on! We flushed the brake and clutch systems on my 04 and Bo's, um, what year is it? Anywho, it all went flat smooth. Bob removed my oem bleeders from the rear cali, and replaced them with speedbleeders (M10x1.0) for an easy bleeding. A light touch on the actuators is a must. It's SHOCKINGLY fast. (There's a memorable phrase!) And, I remember reading somewhere that the bleeders needed a flat point, so to speak, to fit into the clutch fillerupper. I had struggled getting a pointed speedbleeder into that durn thing before. So when we pulled the oem bleeders, imagine my joy to find them perfectly suited for the job. One screwed into the clutch fillerupper deal easily, and with the special speedbleeder bag attached higher that the bleeder, we only had to crack open the bleeder, and pump the handle repeatedly to flush the system. With the bag up above the bleeder, no air can be pulled back in, and with each pull, more pushed through than came back. In no time we had good clear fluid. Bo removed the bleeder, re-inserted the grub screw, and I was in bidness! So, see the attached pics of the oem bleeders and enjoy. Oh, and we followed up with some fine Q at our new Hard 8 in Coppell. Wonderful!

[BeemerRiderBoB]

And a great time was had by all present...including the non-muggy temps.

So, a new business venture is now in the making...Fluid Changes by the "Flush Brothers", ok so we're still working on the name. And we were sure having fun with names.

But have flush bag, will travel to a tech session near you. Brake & Clutch flushes our specialty, and camraderie free with each service. So, we gonna do this at CCR? Hmmm, sounds like opportunity knocking!

Enjoyed it guys....let's do more so I can earn that Munster Garage Specialty Certification. I wants my crayon certifikate hangin' on my fridge!

Bob

[munson]

Enjoyed it guys....let's do more so I can earn that Munster Garage Specialty Certification. I wants my crayon certifikate hangin' on my fridge!

Bob
I have a "Munster Garage" patch for your Dickies shirt! Howzat? :)

[gulfxray]

Sounds like you guys had a lot fun... :)

The whole Bleed/flush thing is the one thing I haven't attempted on my own and still go to the dealer for.

One of these days I'll catch the Flush Brothers and see how it is done, ask a lot of questions, and be able to do it myself (although it wouldn't be as fun and there darn sure isn't any Q up here... )...

[munson]

Sounds like you guys had a lot fun... :)

The whole Bleed/flush thing is the one thing I haven't attempted on my own and still go to the dealer for.

One of these days I'll catch the Flush Brothers and see how it is done, ask a lot of questions, and be able to do it myself (although it wouldn't be as fun and there darn sure isn't any Q up here... )...
We did have fun! Hey, the bleeding was not difficult at all. Come on down and see us, and we'll knock it out for you! :)

Edited for speeling. :p

[Dean_BMW]

I plan on bleeding mine soon. I have an added level of confidence after watching the guys bleed brakes at the tech session a couple of weeks ago.

Did you guys get to eat bar-b-que? How was it??

[munson]

I plan on bleeding mine soon. I have an added level of confidence after watching the guys bleed brakes at the tech session a couple of weeks ago.

Did you guys get to eat bar-b-que? How was it??
The Q was good. I did have to take my pork chop back, though. It was way over cooked. They gave me another without a fuss. It was much better, and is good for two meals! :)

[BeemerRiderBoB]

I have a "Munster Garage" patch for your Dickies shirt! Howzat? :)

Wooo Hooo a Patch! If this biz pans out I can see FLUSH BROTHERS Pins & Hats in our future. I say we go nationwide- let's Franchise now before everyone figures out how it's done!

Quote:
Originally Posted by gulfxray
Sounds like you guys had a lot fun... :)

The whole Bleed/flush thing is the one thing I haven't attempted on my own and still go to the dealer for. Be happy to show you how to git 'er done. As one of the Flush Brothers once said "See it done once and you'll try it urself. Once you've tried it you're experienced, once you've tried it twice you're an expert".

[BeemerRiderBoB]

I plan on bleeding mine soon. I have an added level of confidence after watching the guys bleed brakes at the tech session a couple of weeks ago.

Did you guys get to eat bar-b-que? How was it??

Indeed once you see it done the light bulb burns brighter. Just a couple of "Gotcha's" to watch out for but no deep mystery on the Integral system Flush anymore. We've done 5 bikes now since the Tech Session, all successfully.

As John says, the Q was indeed good...especially since I got to eat for free. Seemed to taste even better- thanks John for the free lunch!!!

Bob

[Dean_BMW]

As John says, the Q was indeed good...especially since I got to eat for free. Seemed to taste even better- thanks John for the free lunch!!!

Bob
I too have noticed how much better free food tastes.... I think it is actually the company of good friends that makes it taste better though.

[Big_E]

Sign me up for the next flush party, if I'm on my 28 days off I'll be there. I'm past due & hadn't worked up the guts to try it yet.

[munson]

Sign me up for the next flush party, if I'm on my 28 days off I'll be there. I'm past due & hadn't worked up the guts to try it yet.
You tell us when you are off, and we'll set it up! :)

[deputy5211]

I have a "Munster Garage" patch for your Dickies shirt! Howzat? :)

Can I have one too, pretty pleeeeeze. :]

[deputy5211]

So, a new business venture is now in the making...Fluid Changes by the "Flush Brothers", ok so we're still working on the name. And we were sure having fun with names.

Bob

Maybe we can co-franchise with Tire Stranglers R Us, eh Bob? :)

[munson]

Can I have one too, pretty pleeeeeze. :]
Why certainly!

[Big_E]

You tell us when you are off, and we'll set it up! :)


I'm home from July 19th thru Aug. 13th.
The first few days when I get home is to fix what got tore up while I was gone & the last few are get ahead before I leave. anywere between is good. Of couse it's hotter than Africa in south Louisiana & Texas at that time, so if the fall is better, I can wait.

[munson]

I'm home from July 19th thru Aug. 13th.
The first few days when I get home is to fix what got tore up while I was gone & the last few are get ahead before I leave. anywere between is good. Of couse it's hotter than Africa in south Louisiana & Texas at that time, so if the fall is better, I can wait.
Well, I'll throw out Sat. July 28 and see what happens. It can be a mini session, half day, to H8 for lunch. It's up to Bob and Bo to confirm.

[DanMartin]

I want to thank the DFW bunch for putting on a mini tech session and allowing me to look over your shoulders. Learned a lot "shockingly fast".
Too bad I missed the Hard 8. Had to go chauffeur the family around. July 28 sounds good to me,although I am the one who can't plan more than a day or two ahead. Had a blast Saturday,thanks for the great weather. Never thought I could be comfy outside in DFW in June.

Dan Martin
Houston

[Texas42]

Mine is a '02. Thanks guys, I'm slow to read the board, I had to do some yard work after all. We are on for doing the brake flush at the the CCR Tech Session (John Z is going to bring his spacers for holding the calipers open). My chop was over-cooked as well, Bob maybe you can put in a word with your daughter, since you have an inside track. I think the 28th is good for me.

[BeemerRiderBoB]

Mine is a '02. Thanks guys, I'm slow to read the board, I had to do some yard work after all. We are on for doing the brake flush at the the CCR Tech Session (John Z is going to bring his spacers for holding the calipers open). My chop was over-cooked as well, Bob maybe you can put in a word with your daughter, since you have an inside track. I think the 28th is good for me.

Well...the Flush Brothers at CCR should be a good thang.

Already told them about the Chops...think it was the newly trained cooks. They say they'll do better.

I'm ok for 28 July but gotta be done before noon.

[BeemerRiderBoB]

Maybe we can co-franchise with Tire Stranglers R Us, eh Bob? :)

Diversification is good....more the merrier! Hope you're enjoying the trip...

[Big_E]

Well, I'll throw out Sat. July 28 and see what happens. It can be a mini session, half day, to H8 for lunch. It's up to Bob and Bo to confirm.


I'm there!!

[munson]

I'm there!!
I had to google map Prairieville, LA. It's not far from my papa's hometown, Napoleonville. I also noticed that the map denotes "Munsons" just to West on hwy. 1006. He was raised right there on the Glenwood Sugar Plantation. I look forward to seeing you. :)

[munson]

I'm there!!
Hey Big E! Are you coming over to see us on the 28th?

[Texas42]

I think the 28th is good, I will be back from CO on the 23rd and then I will be back from Austin on 26th so I don't plan on going anywhere that weekend I will be pretty traveled out for a few days.

I'm always ready for Hard 8 BBQ.

What time do we start? :)

[deputy5211]

Please count me in. Happy to have the "party" at my place. I have an awning I can put up over the drive for shade.

Early sounds good for cooler weather.

[BeemerRiderBoB]

Got Flush Bag in hand, will travel. Just wanna be sure which house to show up at....and yes, Hard 8 Q after! Crack O' Dawn right?

[DanMartin]

I'll go dawn +30min if it's ok for a houstonite to come.

Dan Martin

[munson]

I'll go dawn +30min if it's ok for a houstonite to come.

Dan Martin
Of course, Dan!

I see now that Big E will be back home tomorrow, so I'm sure he'll confirm then. Let's meet at Bo's under that great carport.

Maybe Herman will drop by and read the codes for us, too!

And Bob and Tony, I have your patches! :dance:

[deputy5211]

And Bob and Tony, I have your patches! :dance:

:dance: :dance: :dance: :dance: :dance: :dance:

[BeemerRiderBoB]

And Bob and Tony, I have your patches! :dance:

Flush Brother Patches...you're too cool John!

PS...just returned from the Nationals in Wisconsin- Flushed 3 (Integral) bikes and gave instructions to 2 more. Just upped our Flush count....see ya soon!

[swaanimal]

Flush Brother Patches...you're too cool John!

PS...just returned from the Nationals in Wisconsin- Flushed 3 (Integral) bikes and gave instructions to 2 more. Just upped our Flush count....see ya soon!

Bob, what is the part number for the Speed Bleeders for the front calipers? The rears, I remember are 1010.

[munson]

Flush Brother Patches...you're too cool John!
Well, they are Munster Garage patches, so am I still cool? :o

PS...just returned from the Nationals in Wisconsin- Flushed 3 (Integral) bikes and gave instructions to 2 more. Just upped our Flush count....see ya soon!
Good on ya, BeemerFlusherBob! :)

[Texas42]

Of course, Dan!

I see now that Big E will be back home tomorrow, so I'm sure he'll confirm then. Let's meet at Bo's under that great carport.

Maybe Herman will drop by and read the codes for us, too!

And Bob and Tony, I have your patches! :dance:

That's fine with me, I will ask Herman if he is available. We are on our way to Paonia today and will be back in DFW on Monday night.

Thanks to Herman you can track our travels:

http://www.findu.com/cgi-bin/find.cgi?call=k5hvb-10

[munson]

Bob, what is the part number for the Speed Bleeders for the front calipers? The rears, I remember are 1010.
Bob bought some SB8125L's, as specified on the SB site, but as I recall he could not screw them in. When I measure the ones on my 2004 BMW-branded brakes, it's 7mm. The SB7100 seems to fit that bill, but I'm not positive, and won't be until I pull one out for closer inspection.

[munson]

That's fine with me, I will ask Herman if he is available. We are on our way to Paonia today and will be back in DFW on Monday night.

Thanks to Herman you can track our travels:

http://www.findu.com/cgi-bin/find.cgi?call=k5hvb-10
Oh, that's cool. It's a HAM thing I'm guessing. Looks like he is in Gunnison as of 12 hours ago. Have a great time, y'all!

[Dean_BMW]

Oh, that's cool. It's a HAM thing I'm guessing. Looks like he is in Gunnison as of 12 hours ago. Have a great time, y'all!
Yeah it is... Herman was telling me about it when I met him down there at the tech session. Pretty neat... at least his wife knows where he is at. I am a ham too, but do not really spend much time with it any more... not enough hours in a day.... but I have earned by Geek patch :)

[BeemerRiderBoB]

Well, they are Munster Garage patches, so am I still cool? :o

:)

Wow, even better- the official "Garage Patch". I feel honored!!! And yep, ur still kool.

[BeemerRiderBoB]

Bob bought some SB8125L's, as specified on the SB site, but as I recall he could not screw them in. When I measure the ones on my 2004 BMW-branded brakes, it's 7mm. The SB7100 seems to fit that bill, but I'm not positive, and won't be until I pull one out for closer inspection.

Jason, you're right, the Speedbleeder folks sent me the wrong size for front brakes. Rears were definitely SB1010S. Haven't measured my fronts yet and just called the Speedbleeder folks back to see what they say. Will holler at ya when I get the right size. Remember my bike is an O2/Integral....forgot what year yours is. later, Bob

[BeemerRiderBoB]

Bob, what is the part number for the Speed Bleeders for the front calipers? The rears, I remember are 1010.

Jason, Speedbleeder is sending me 2 6's and 2 7's in their smaller length to verify fitment. Should be here in 3 or 4 days and we'll know for sure. Speedbleeder says there were a couple of different Front sizes for the 02 model year and they want to document it...hence the fitment try. Will stay in touch. You coming on 28 July? Bob

[Dean_BMW]

Hey guys... how many bikes are showing up? If your driveway is not full, I might drive down and bleed mine too (if I can get some SB's ordered in time). I can bring the GS-911 too.

[swaanimal]

You coming on 28 July? Bob

I haven't looked at the calender yet (checked with the boss), kids are starting to get active again.

[BeemerRiderBoB]

I haven't looked at the calender yet (checked with the boss), kids are starting to get active again.

Well, even if you can't make the session, how about Lunch at the Hard 8 Q? Bring the wife and kids if you want....see ya soon...Bob

[Big_E]

I'm home! If we are still on for the 28th, what do I need to get? Are speed bleeders needed? Don't know if I'll have time to get some. Didn't even uncover the bike yet, takes me a few days to fix what got tore up around the house while I was gone. It is NOT this hot in Africa!

[munson]

I'm home! If we are still on for the 28th, what do I need to get? Are speed bleeders needed? Don't know if I'll have time to get some. Didn't even uncover the bike yet, takes me a few days to fix what got tore up around the house while I was gone. It is NOT this hot in Africa!
You just come on, E. We got everything you need at the Munster Garage! :)

[munson]

Hey guys... how many bikes are showing up? If your driveway is not full, I might drive down and bleed mine too (if I can get some SB's ordered in time). I can bring the GS-911 too.
Come on down, Dean. You are always welcome without question. :)

[Big_E]

Just give me a time & an address to punch in to the GPS.

[Dean_BMW]

Come on down, Dean. You are always welcome without question. :)
Thank you for your generosity, but I didn't want to overload the drive way (actually, I am a selfish old fart that was hoping there would be some shade left).

[munson]

Just give me a time & an address to punch in to the GPS.

Map to Bo's house. (http://maps.google.com/maps?f=q&hl=en&q=117+Red+Oak+Ln,+Flower+Mound,+TX+75028-3538,+United+States&sll=37.0625,-95.677068&sspn=58.555544,112.851563&layer=&ie=UTF8&z=16&ll=33.012532,-97.058201&spn=0.007683,0.013776&om=1&iwloc=addr)

[munson]

Just give me a time & an address to punch in to the GPS.
Oh, and for the time, the crack of dawn.

[munson]

Thank you for your generosity, but I didn't want to overload the drive way (actually, I am a selfish old fart that was hoping there would be some shade left).
BTW, you don't need Speedbleeders if you have friends! Bob and I can speed bleed without 'em! :)

[Big_E]

I'm there! You guys are great! Oh, can you PM me a phone number just in case something unexpected happens?

[munson]

I'm there! You guys are great! Oh, can you PM me a phone number just in case something unexpected happens?
Think nothing of it! My cell is 817-371-7000.

[Big_E]

Mine is 225-715-2105. I should be in the area Friday evening.

[Big_E]

Would this be a good time to do the coolant? I know I can do the coolant myself but, will the tupperware be off at this time to access it?

[BeemerRiderBoB]

Would this be a good time to do the coolant? I know I can do the coolant myself but, will the tupperware be off at this time to access it?

Answering for John.....

Just both side (battery) covers will come off for the Brake Flush, not the fairings. Up to you if you wanna do the Coolant.......your call.

See ya then. Bob

[munson]

Would this be a good time to do the coolant? I know I can do the coolant myself but, will the tupperware be off at this time to access it?
We only have to remove the two small side covers to get to the brake stuff. The big side covers don't really have to come off. You can pry them out and reach in with a torx bit to remove those screws. I'll have to bug out a little early before lunch to meet up with my Sweetpea for an overnight trip, so it would be up to y'all as to how much you want to do.

[BeemerRiderBoB]

BTW, you don't need Speedbleeders if you have friends! Bob and I can speed bleed without 'em! :)

And bleedin' fast too! Flush Bro's R Kwik!

[Big_E]

Sounds good I'll do the coolant latter. Was wondering, has anyone ever done an Iron But & flush & bleed ABS brakes in 24hrs?

[cfell]

yup.. done that.. not hard

[Big_E]

Is the party still on? If yes I'll strap on my snorkel & head that way tomorrow morning.

[munson]

Is the party still on? If yes I'll strap on my snorkel & head that way tomorrow morning.
Since we have not heard the contrary, I'll say that we are!

[deputy5211]

o-dark-hundred plus thirty, right?

Since I have special training and am certified by the state, I'll bring the donuts! :histerica

[DanMartin]

o-dark-hundred plus thirty, right?

Since I have special training and am certified by the state, I'll bring the donuts! :histerica
So that is what that badge is for. I'll see y'all early Sat. morning.
I'll bring some sausage kolaches from a bakery in West Tx.


Dan Martin

[munson]

So that is what that badge is for. I'll see y'all early Sat. morning.
I'll bring some sausage kolaches from a bakery in West Tx.
O, I love kolaches! Maybe too much. :o

[BeemerRiderBoB]

Since we have not heard the contrary, I'll say that we are!

Oh, most Def....we are ON for Sat morning w/the Flush Bro's. Confirmed yesterday w/Bo...who won't be back until tonite.

See ya'll at the Crack.......O'Dawn. Bob

[Big_E]

Pulling out sometime in the morning, should be in the area late in the afternoon. My Grip Puppies came in today, should help the front end ride higher in the water.

[deputy5211]

Still a little woozy from the doc's today. Does anyone have a spare bottle (or two?) of brake fluid for my '05 in case I can't get some tomorrow (Friday)?

[Dean_BMW]

http://vortex.accuweather.com/adc2004/common/images/wxicons/blue_frcst_bg/17.gif
Accuweather.com forecast for DALLAS, TX
Saturday, Jul 28
High: 92 °F RealFeel®: 101 °F
Intervals of clouds and sun with a couple of thunderstorms

Well guys, I think I will hang around 74801 this weekend. Hope everyone has a good flush! :)

Looks like it is going to be a little cooler than last weekend, but I think I will stay here anyway. I got so hot last weekend I was on the verge of being sick when I got home.

[Texas42]

Still a little woozy from the doc's today. Does anyone have a spare bottle (or two?) of brake fluid for my '05 in case I can't get some tomorrow (Friday)?


No problem, got fluid.

[scarver]

Plan to be there with the GS-911 to reset fault codes. Will be riding the F650CSA - it also needs a brake flush.

[munson]

It was a fine day at the Munster Garage once again. Bo hosted us, and we thank him for his hospitality. Big E rolled in for his brake fluid flush, and Bob had to learn how to work on an '05 system on the fly! Good job, brother Bob! Dan was there with Kolaches, (yum!) and Tony arrived with the donuts. Herman was there reading the codes, Bruce dropped by to visit, and so did Bullet Bill. We got four bikes done today, and then it was off to the Hard 8 for some well deserved Q. Dan's son met us there and we had the usual feast. We also got to meet Bob's daughter Emily. Thanks y'all for another fun day. :)

PS. We learned that the 04 and 05 models use the SB7100S bleeders in the front, for the record.

[deputy5211]

I fine day indeed, Brother John. I received the coveted official "Munster Garage" patch, now I have to obtain the official shirt and have my name put on it.

Thanks to all for the kind assistance, good fellowship, and great fun. We need to get together more often, we live so close together.

BTW, I purchased the GS911 today, should be here in a week or so. :)

[cfell]

Hey, guys.. I almost had Phyllis agreeing to ride up this morning.. but the weather guy scared her.. So, I went to Grif's...

Glad you got the brake thingy worked out... do you notice the improved feel?

[deputy5211]

You were missed, brother. Sounds like a good time was had by all at Grif's, though.

Brakes working well, final drive flushed and filled with Red Line heavy shock-proof.

[Dean_BMW]

Hey Tony... is it ok if I add your name to the list of GS-911 owners in the "Bike Talk" thread?

(its amazing what you can find out from a wrong number) :)

[BeemerRiderBoB]

Hey, guys.. I almost had Phyllis agreeing to ride up this morning.. but the weather guy scared her.. So, I went to Grif's...

Glad you got the brake thingy worked out... do you notice the improved feel?

Kudos to Channing...many thanks again for the help. Would never have found the 2 wheel circuit reservoirs. That was the key to making it successful since 2 of the bikes we did were 05's and the Flush Bro's are are still riding 02-04's.

Owe ya one...gracias!

[Big_E]

Made it home, brakes worked, didn't have to jump off in front of my house. The "Flush Brothers" & all the Munster Garage crew are awesome. Thanks to all, I had a great time & will be back. 500 miles is not too much for me to ride to hang out with friends. I think I need to attend one more Flush Party before I try it. I would like to be able to help people in my area, they could always follow me to Munster Garage. It was fun, Thanks!

[Texas42]

Thanks to all for attending another successful Munster Garage, Flush Party.

[Big_E]

Thank you Bo for hosting it!

[deputy5211]

Hey Tony... is it ok if I add your name to the list of GS-911 owners in the "Bike Talk" thread?

(its amazing what you can find out from a wrong number) :)

Of course, Dean, please add me to the list. My device should be here by the end of the week.

As for the wrong number... I may have intended to call another Dean, but is was nice chatting with you just the same. :cool:

[deputy5211]

Made it home, brakes worked, didn't have to jump off in front of my house. The "Flush Brothers" & all the Munster Garage crew are awesome. Thanks to all, I had a great time & will be back. 500 miles is not too much for me to ride to hang out with friends. I think I need to attend one more Flush Party before I try it. I would like to be able to help people in my area, they could always follow me to Munster Garage. It was fun, Thanks!

E --

Next time you come in, don't spend your money on a hotel. I usually have an empty room or two, and if I don't, I'm sure one of our brethren Munsters can help you out.

[deputy5211]

Thanks to all for attending another successful Munster Garage, Flush Party.

And a big thanks to you, Bo, for being the gracious host... again!

[Dean_BMW]

As for the wrong number... I may have intended to call another Dean, but is was nice chatting with you just the same.
Tony:
I wasn't going to tell off on 'ya.... I was just going to let the others wonder what that meant. :)

I will jump over there and add your name.

BTW: Just got back from a 150 mile ride. Same temp as last weekend... about 96 degrees on my bike themometer... I did much better this week. But probably only because I didn't have as much stopped/traffic time with all my gear on.

[BeemerRiderBoB]

Made it home, brakes worked, didn't have to jump off in front of my house. The "Flush Brothers" & all the Munster Garage crew are awesome. Thanks to all, I had a great time & will be back. 500 miles is not too much for me to ride to hang out with friends. I think I need to attend one more Flush Party before I try it. I would like to be able to help people in my area, they could always follow me to Munster Garage. It was fun, Thanks!

Yo E, sure glad you didn't need to stop 'tween here 'n La. Just tryin' to visualize u jumpin' on and off- too funny! And ur welcome back anytime...whether for a Flush Party, Tech session or just ridin'.

We enjoyed meeting ya....and stay away from those gay I-Hops will ya!

[Big_E]

I made it home this morning, stopped in Natchitoches last night. I could have made it home by about 11 last night but chickened out. I'll ride in the rain & I'll ride in the dark but, dark, rain & tired, I stopped. There was a Holiday Express with an I-Hop next door & a Motel 6 with Burger King next door. Can you guess which on I Picked?

[DanMartin]

Bo, thanks for being a great host. Was great getting to meet everybody and work on some scoots. Got in last night. 250 miles,only 5 miles of rain,would never have figured on that. Going to have to think seriously about going to CCR just to watch the Flush Bros perform.

dan

[BeemerRiderBoB]

I made it home this morning, stopped in Natchitoches last night. I could have made it home by about 11 last night but chickened out. I'll ride in the rain & I'll ride in the dark but, dark, rain & tired, I stopped. There was a Holiday Express with an I-Hop next door & a Motel 6 with Burger King next door. Can you guess which on I Picked?

Now that's too funny....I'm starting to wonder 'bout you. But maybe it's your GPS that keeps finding the I-Hops.

Glad you made it home safe...see ya soon!

[cfell]

I know a guy with a HAMMER who can fix those problems....

[BeemerRiderBoB]

I know a guy with a HAMMER who can fix those problems....

I can't spill the beans on Big E cause it's so unbelievable. And I laugh so hard everytime I think about it, but....maybe he'll tell ya'll the WHOLE STORY about the I-Hop near the Days Inn, and why he'll never go into an I-Hop again. How 'bout it BigE? It'll make us smile...you savage, silly boy!