Lite Blazer and Can-bus?

[HowardRichman]

Pirates lair is advertsing a Run-N-Lites Lite blazer licence plate frame LED set up to help illuminate braking and tail lights. The 06-07 K1200's have the Can-Buss system and not sure if this kit will work with the BMW's elecytrical system. I'm assuming there's a sensor or a plug and play to distingish between tail and brake, on this single lead system.
Any info will help;

Thanks; Howie....

[grifscoots]

I run one on my 07 GT with no problemo.

[HowardRichman]

I run one on my 07 GT with no problemo.


Thanks for reply! Have you tried or heard of the Kisan unit w/ turn signal and brake combined? Howie...

[grifscoots]

Thanks for reply! Have you tried or heard of the Kisan unit w/ turn signal and brake combined? Howie...Yeppir. Randy runs that one on his GT.

[tmans]

Grif - can you pls provide specifics on the install? Are all necessary wire present in the tail light area?
Thanks, Tmans

[grifscoots]

Grif - can you pls provide specifics on the install? Are all necessary wire present in the tail light area?
Thanks, TmansMost of these products require a switched hot that isn't in the tailight area.

I did a write up on my P3 tailight installation on www.k-bikes.com (http://www.k-bikes.com) .

Here (http://www.k-bikes.com/forums/showpost.php?p=81513&postcount=1) is the link to the write up in the Hall of Wisdom over there.