barchetta365
Jun 19th, 2007, 8:16 pm
With Raffy's help, I wired the vectraLIGHT LPC-16.
FYI: The Kisan instructions are wrong for BMW. On my '05 LT, the left signal wire is Blue/Red (LPC-16 yellow wire) & the right is Blue/Black (LPC-16 red wire). As Raffy said, brown on the bike is ground, which mates to the blue LPC-16 wire.
I choose the yellow wire on the bike (one of the taillights) to mate to the LPC-16 green wire. The final connection is LPC-16 blue (power input) which I attached to the second (non-brown) wire on the center light.
Thanks again Raffy!!
FYI: The Kisan instructions are wrong for BMW. On my '05 LT, the left signal wire is Blue/Red (LPC-16 yellow wire) & the right is Blue/Black (LPC-16 red wire). As Raffy said, brown on the bike is ground, which mates to the blue LPC-16 wire.
I choose the yellow wire on the bike (one of the taillights) to mate to the LPC-16 green wire. The final connection is LPC-16 blue (power input) which I attached to the second (non-brown) wire on the center light.
Thanks again Raffy!!