Anyone interested in another HID group buy

[patroa1]

A couple of weeks ago I was contacted by one of our forum members (blkhwk34) and told Fashtek would do another group buy in May and would I check into it since I was the one who set up the previous one.
So I contacted Fashtek, and yes this is true, he would definitely like to do another group buy. The price this time is $75 for bike kit and $150 for car kit, and yes you can mix and match for HI and Low beam.
Right now he is restocking his supply, seems we pretty much depleted it last time, but he would like to know how many are interested. So if you did not take advantage of the last one and are interested please start a list (add name and cut and paste). Once I have a list I will finalise details.

Also he has 50 watt HID's and I'm checking on the price for those also.

Name

[miren]

Yes, I would be very interested.

[Ted Shred]

bummer. I ordered an H7 and H3 yesterday from HID-light.com

178 shipped. Still not bad...

[Saxon]

Count me in.
I bought the CQ unit, installed in my 2001 just before I sold it - Duh
Need the low beam unit for my 2003

Mike

[microdoc]

Count me in!

[mikey]

Im in as well...is it too late?

[Gino]

Count me in - high beam only.

Thanks!

[Tweety1]

If these work on the F800S, count me in lo & hi.

[mseliske]

I'm interested in adding HID to my 2002 K1200LTE. Thanks!

[JCabranes]

I'm in depending on the price

[patroa1]

Ok guys group buy has not started yet. Just trying to get a feel of how many are interested. I will let everybody know as soon as http://www.fashtek.com is ready to roll. The price is: $75.00 for bike kit, and $150.00 for car kit .

Tweety1If these work on the F800S, count me in lo & hi.
Tweety, don't know about F800S I'm not familiar with the bike or which bulbs it takes.

So far we have

JCabranes
Miren
Saxon
Mikey
Gino
Tweety1
mseliske

[DEKESBMWTOY]

Pat

We met at the BMW SE Mich open house, on Saturday.
Count Me in for Hi and Lo
Thanks

[unleashd]

Count me in for a HI/LOW set for my '99 LT.

[jers99lt]

Please count me in, too. Both Hi & Low for '99 LT. Are there any suggestions for temperature?

Jer

[AlaskaFish]

Pat, count me in also. For a HIGH BEAM ONLY.

Thanks,

John

[Steve_R]

Yes, anything close to 4200k will give a nice white light. Going higher will start to turn the light blue and less will start to turn yellow. YMMV

[bpd283]

Count me in - Heres the list so far

JCabranes
Miren
Saxon
Mikey
Gino
Tweety1
mseliske
Dekesbmwtoy
Unleashd
Jers99lt
AlaskaFish (Hi Only)
Bpd283

[patroa1]

Thought I better let everyone know the status of the group buy. As of last nite http://www.fashtek.com (http://www.fashtek.com/) was about 2 weeks away from having his supply of units restocked. So we have 2 options we can wait until he has enough units to ship without delay or you can elect to order now with the knowledge that the units will not ship for at least 2 weeks.



So here are the details of the group buy.

Price: $75 for bike kit, $150 for car kit

How to order:
1.) Just copy and paste this to Pay-Pal sales@fashtek.com (sales@fashtek.com)
2.) Include a confirmation e-mail with Pay-Pal stating which unit you are
buying, ie. h-7 4300k etc
3.) Be sure to mention bmwlt.com group buy also.


So if you want to order now and wait till he has units in stock aprox. 2 weeks, feel free or you can wait and order after he tells me he has received units from his supplier. Your choice.


Skip, thanks for making the list.

[permline]

Hello, I live in Australia, so is there any chance one of you great people would repackage and mail to me (you will be compensated) as i am very interested in a HI/LOW set for my '99 LT.
Thanks Dave

[patroa1]

Dave, during last group buy I know they sent at least one unit to Europe shipping was $20 extra, not sure if you have to worry about customs, VAT etc. but if need it just mailed to you in plain brown wrapper I'm sure I could work something out for you. Let me know by PM.

[namrehwp]

i would like to get low and hi beam. i have an 05 lt. can you tell me the type of lites recommended? also how do i get on the list as i would like to get the lights? also i will be leaving for a ride in mid june , would i have them before then? and how long does it take to install them when you have not done it before? thanks in advance and i look forward to your reply.

[namrehwp]

i want to buy, please tell me the type, hi and low . thanks in advance i will place an order when i figure out how to?? thanks.

[patroa1]

Paul, you are on the list. You might go ahead and order lights now. Get the 4300k in the bulbs that fit your bike. Low beam is H-7, not sure what your high beam is. If it is H-9 then a H-11 will work. Install should take not more than an hour depending on where you put ballasts.

[namrehwp]

how do i order, and how do i klnow what the hi is? thanks for your help. sorry to be a pain.

[zippy_gg]

how do i order, and how do i klnow what the hi is? thanks for your help. sorry to be a pain.Your high beam is an H9.;)

[keepitreal_k]

Not sure if I need to let you know that I am interested, or just go ahead and order...What's the price on the HI/LOW?

Thanks!
Kirk

[bpd283]

The Fashtek site isn't real clear on which to order for which bikes. I would just like to confirm this is what we should order
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If this is correct - GREAT - If not lets get this post deleted so no one makes a mistake.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
For Pre 2005
Low Beam - H7 4300K
High Beam - H3 4300K

2005 and up
Low Beam - H7 4300K
High Beam - H11 4300K

Select the GTEC Conversion kit from the left side of their site

[zippy_gg]

Your information is correct!
The Fashtek site isn't real clear on which to order for which bikes. I would just like to confirm this is what we should order
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If this is correct - GREAT - If not lets get this post deleted so no one makes a mistake.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
For Pre 2005
Low Beam - H7 4300K
High Beam - H3 4300K

2005 and up
Low Beam - H7 4300K
High Beam - H11 4300K

Select the GTEC Conversion kit from the left side of their site

[patroa1]

DO NOT ORDER FROM THEIR WEB SITE !!!!!!

PLEASE FOLLOW THESE DIRECTIONS TO ORDER:


How to order:
1.) Just copy and paste this sales@fashtek.com (sales@fashtek.com) to Pay-Pal
2.) Include a confirmation e-mail with Pay-Pal stating which unit you are
buying, ie. h-7 4300k etc
3.) Be sure to mention bmwlt.com group buy also.

If you order from web site you will not get group buy price. Price is $75/kit

If you have any questions PM me.

[cws]

If you have any questions PM me. Hi Pat. Will PM about a second shipment to Oz. Sounds good. Chris

[svenscot1]

Thanks for organizing. Just ordered on paypal 1xH7 and 1xH11 for low and high beams.

[cws]

Whats the general concensus on colour temp for the bulbs. Saw 4300k recommended in this thread, and 5000k recommended in an earlier group buy thread.
Don't want to go blueish, but in my work (film) 5000k is roughly daylight colour temp, and is what I consider "white".
Anyone know off top of their head what the colour temp of the halogens are?

[patroa1]

Chris, Halogens are 3200k, 4300k is white, the higher the color temp. the more blue the light and the less usable light.

4300k is blue only on ignition then turns bright white, the 5000k have a slight bluish tint after they reach full power.

[cws]

Chris, Halogens are 3200k, 4300k is white, the higher the color temp. the more blue the light and the less usable light.

4300k is blue only on ignition then turns bright white, the 5000k have a slight bluish tint after they reach full power.
:thumb: Nice, guess there's a slight difference in how auto-electrical light designers and film people view the world! Thanks Pat!

[zippy_gg]

The recommendation for 5000k was probably linked to the CQ Light buy as they do not offer 4300k. 5000k is the lowest temp they carry.

Go with 4300k if it is available. I had it on my 99 LT (from hid-online, but at $300.00) and loved it. I now have 5000k on both my 03 and 05 LTs (from CQ Light) and it does have a blueish tint.

Whats the general concensus on colour temp for the bulbs. Saw 4300k recommended in this thread, and 5000k recommended in an earlier group buy thread.
Don't want to go blueish, but in my work (film) 5000k is roughly daylight colour temp, and is what I consider "white".
Anyone know off top of their head what the colour temp of the halogens are?

[cws]

Does the $75 per kit cost include shipping within the US (ie, to Texas)??
I'm about to order.... :yeah:

[markmack]

I ordered a high beam and a low beam.
Thanks,
Mark

[patroa1]

Chris, The $75 does include shipping in the US. So having them sent to Tony is no problem.

[jers99lt]

I ordered a high beam and a low beam.
Thanks,
Mark

+1 What Mark said. Can't wait to try them out.
Jer

[Saxon]

Thanks again Pat for organizing this.
ordered my low beam yesterday

Mike

[rglassma]

Just finished installing the low beam Kit from Fastek. Great, great value and no trouble with the install..... Very pleased !!!

If you haven't already gone for this, don't miss out.. Best buy you will ever get on an accessory for your LT... What a great 75.00 counting shipping...

[John_LT]

Hi,

I have also sent payment for the low beam for my 99Lt. I cant wait.


Thanks
John :dance:

[jers99lt]

Has everyone received their HIDs that has ordered them or should I give the supplier a gentle nudge? It's been 2 weeks.

Jer

[Lonewuff]

I have not gotten mine. Ordered an H-11 in 5K for my 06 almost 3 weeks ago.

[mtrevelino]

Has everyone received their HIDs that has ordered them or should I give the supplier a gentle nudge? It's been 2 weeks.
Jer
Its been about three weeks for me. I look every day at the door when I get home from work, but it is not there.

[unleashd]

I've been in phone and email contact with them. Since they are local (about 25 miles from where I live) I wanted to just go and pick it up. From what I understand, they are still replenishing their stock and I hope to pick up what I want from them early next week.

[mseliske]

I pinged him yesterday and received a reply today. He indicated they expect their shipment in at the end of this week, and our orders should go out early next week.

Best,

Mark Selisker
2002 K1200LTE
Raleigh, NC

[patroa1]

Mark, that is the info I received from Fashtek also. It seems that Us Customs has been slow to clear his resupply from his supplier.:(

I believe if you read post #18 in this thread you will see that Fashtek informed me that it would be at least to 2 weeks before he had enough units to fill all orders. I assure you Fashtek will deliver your HID units as soon as he can, sometimes things happen beyond our control, but they have never failed to deliever.

Sorry for the delay

[mikey]

Is is too late to get in on this...I'd like to get the HI&LO beam...also where details on special pricing? tks Mike

[utrera1]

Count me in...

[patroa1]

Mike, It is not to late to make an order, just follow these directions.


So here are the details of the group buy.

Price: $75 for bike kit, $150 for car kit

How to order:
1.) Just copy and paste this to Pay-Pal sales@fashtek.com (sales@fashtek.com)
2.) Include a confirmation e-mail with Pay-Pal stating which unit you are
buying, ie. h-7 4300k etc
3.) Be sure to mention bmwlt.com group buy also.

Remember DO NOT USE THEIR WEBSITE TO ORDER!!!!!

[cws]

I got a Fedex shipment note overnight saying my HID's are on their way.... :dance:

[jers99lt]

I got a Fedex shipment note overnight saying my HID's are on their way.... :dance:
I also received a FedEx shipping notice though the business wasn't
named. I guess they've begun to hit the streets.

[patroa1]

Glad to hear that Fastek is finally shipping.

Remember guys when doing the install that the hole you drill in the headlight housing should not exceed 7/8" everthing else is the same as the instructions provided by "messenger13".

[mtrevelino]

Mine was sitting on my door step today.

[jers99lt]

Got Mine. :D Nice weekend project (in between band practice, finding apt five hours away for daughter at law school (Ann Arbor) and I guess the lawn could use a mow...). I don't think a satisfying ride is in the forecast. Speaking of forecast. It's been great for riding in the Midwest.

Have fun,
Jer

[markmack]

Glad to hear that Fastek is finally shipping.

Remember guys when doing the install that the hole you drill in the headlight housing should not exceed 7/8" everthing else is the same as the instructions provided by "messenger13".

Mine just arrived! What size does the second hole for the high beam need to be.

Thanks again,
Mark

[utrera1]

Count in. Where do I send the money?

Wendell

[utrera1]

Count me in.

[Coot]

How long have most of you had to wait before getting your order from Fashtek?
I received one email from Mr. Zhang saying that everything was good to go. I sent him one asking if there was a problem, no reply, answering machine is full when I try and call, please call back. I ordered on the 12th of June, it's now the 19th and no kit or email even saying it has been shipped. :confused:

[patroa1]

From what I understand Fashtek had alot of backorders to get out to members of this forum and probably accounts for the delay. That being said I would think that your order should arrive soon, also I never received anything saying it had been shipped it just arrived.

[patroa1]

Mine just arrived! What size does the second hole for the high beam need to be.

Thanks again,
Mark

Mark, I did'nt install a high beam , but assume it to be the same size as low beam . but you know the old rule " Measure Twice--- Cut Once":)

[utrera1]

Let me know what I need to do.

[patroa1]

All you need to do is follow these instructions.


Price: $75 for bike kit, $150 for car kit

How to order:
1.) Just copy and paste this to Pay-Pal sales@fashtek.com (sales@fashtek.com)
2.) Include a confirmation e-mail with Pay-Pal stating which unit you are
buying, ie. h-7 4300k etc
3.) Be sure to mention bmwlt.com group buy also.

Remember DO NOT USE THEIR WEBSITE TO ORDER!!!!!

I would also e-mail them about overseas delievery, I think they added $20 to do that. I would check with them. Here is their e-mail addy contact@fashtek.com

[Offwego]

All you need to do is follow these instructions.


Price: $75 for bike kit, $150 for car kit

How to order:
1.) Just copy and paste this to Pay-Pal sales@fashtek.com (sales@fashtek.com)
2.) Include a confirmation e-mail with Pay-Pal stating which unit you are
buying, ie. h-7 4300k etc
3.) Be sure to mention bmwlt.com group buy also.

Remember DO NOT USE THEIR WEBSITE TO ORDER!!!!!

I would also e-mail them about overseas delievery, I think they added $20 to do that. I would check with them. Here is their e-mail addy contact@fashtek.com



Thanks for the deal I ordered Tuesday and called yesterday. They said it was shipping yesterday! Love those group buys!

[SoberBiker]

Thanks for the "Group buy". I ordered-received and installed the light and it went in perfectly!


Thanks again for the "deal" :D

A side note...
I installed the ballast in the left hand side panel where I believe the ride adjust lives. It seemed just too congested in the nose cone and after taking the left side panel off, there was all this space...:bmw: . Plenty of room for the install and enough slack in the connections. I attached the ballst with super duty velcro to the frame.

http://www.k-bikes.com/gallery/files/8/0/7/7/DSC02681.JPG

http://www.k-bikes.com/gallery/files/8/0/7/7/DSC02683.JPG

[grifscoots]

I installed the ballast in the left hand side panel where I believe the ride adjust lives. Saweet. That's the ABS, BTW. Now, sing along with me, "I can see clearly now...."

[patroa1]

Woody, nice install and great pic's. :) Looks like they changed the ballast since I got mine. It's suprising how many places there are to hide things when you remove the tupperware. :dance:

[Coot]

Well, my light kit is suppose to be here the 28th according to Fedex. I can hardly wait to be able to see better at night! But I'll have to wait till the 1st to install it Patience has never been one of my virtues. :)
And thanks Patro1 for setting up the group buy.

[Coot]

Received my stuff from Fashtek today. I was going to do the install on my days off which dont start till Sunday morning, but I woke up early today and opened the front door and there it was. I brought it in and opened the box and looked at the contents, looked at the clock and said screw it I have time. Took about an hour, I don't have a step drill so I used my trusty rotozip after using a 3/4 inch wood bit to make a hole. I have not messed with the adjustment knob yet, Cant wait till I can ride it in the dark.

[sk8sslow]

Order and received in less than a week. Hope to install over the weekend.

[Offwego]

Ordered June 21st, received June 27th and since my fairing is still off, installed in 20 minutes June 27th. I can see clearly now.....can you say retina burn! Warning don't stare into the headlight form a close distance! Now I know how Ray Charles felt! May have to get a seeing eye bike.... Just teasing, I'm not quite that stupid.

[McRuss]

Got my H7 last week, opened the box tonight. Holy Cow! Ballast? Naw, it's an anchor! And with the rain we are having, and the boat that the storm washed down into my back yard.....I might need the anchor! I installed the H4 a few weeks ago and the ballast was only a third as large. It did have two pieces though (starter?) Any way, I figured if the low beam was that good, I just had to have the high beam too!

[meese]

Woody - any issues with the CAN-bus faulting out? I have the BMW factory low beam, but want to upgrade both high beam bulbs in my GT.

[grifscoots]

Woody - any issues with the CAN-bus faulting out? I have the BMW factory low beam, but want to upgrade both high beam bulbs in my GT.I'm not Woody, nor do I play him on tv, but mine hasn't had one bit of problems.

[cws]

Would someone mind posting a scan (pdf, whatever) of the HID installation instructions that came with the Fashtek kits? (I'm hoping TonyK can get them to me, but this is just in case they dont arrive today via mail or email)
Planning to install this weekend,
Low Beam - H7 4300K
High Beam - H11 4300K
but the install paperwork hasn't turned up (shipped seperate from the kit... for import reasons).

Think I've got most of the Motolight instructions off the Motolights website (caliper mount), unless there's any extra pics/wiring setups specifically for the LT that aren't on the web page??

Any assistance welcome... (and yes, I've been back through most of the threads and how-to pages and printed what I could find!)

cheers guys

[Texas42]

Is Fashtek still taking orders for the group buy?

Thanks

[Rick-L]

I inquired yesterday about HID's for my cage, didn't get a direct answer about the group buy but the price quote was the same ($150 for 2). The guy I have spoken to in the past made it sound like they would always honor our group price.

Email sales@fashtek.com or call direct & ask to be sure, just DON'T use the webform to order or it'll charge you regular price.

Is Fashtek still taking orders for the group buy?

Thanks

[Wilton]

If its not to late, I am interested in hid for my 2005. Thanks

[cws]

Thanks Patrick for organising this, Tony K for shipping, and Jack for your time!. Got mine installed and expect I'll be very happy with the outcome (will ride home in dark tonight..!) :bmw:

A couple of points about my install, (HID's & Motolights) in case they might prove helpful to anyone else.
I stripped the bike down and removed nose cone, which made it easier to install everything, plus feed power (and a direct new earth wire, just for the hell of it) to the front of the bike for the Motolights. Kept all the other wiring at the front.
Installed the 2 x HID ballasts on top of the low beam light casing, with padding. I used the 2 x holding frames supplied and screwed the frames together, and tied in with plastic ties so the 2 ballasts are very secure.

http://i128.photobucket.com/albums/p196/cws127/K1200LT%20HID_Motolights%20install%20sml/HID_ballasts.jpg

http://i128.photobucket.com/albums/p196/cws127/K1200LT%20HID_Motolights%20install%20sml/Ballasts_sit_flat.jpg

http://i128.photobucket.com/albums/p196/cws127/K1200LT%20HID_Motolights%20install%20sml/HID_ballasts_lights_installed.jpg

Putting the low beam (H7) bulb in was a no-brainer, cut the 1" hole as recommended by Joe, and all worked out fine.
With the high beam (H11) I'd read the comments of others about not fitting, and looked closely at the plastic tabs. The flatter top tab is fine, but the 2 lower angled tabs are a little too long, and too wide at the bottom edge. I used a fine Dremel tip to cut down these 2 edges until the bulb could fit snugly into the socket like the original halogen. No need to hot glue or use any tape or adhesive.

I tapped into the original low beam wiring to power the Motolights relay, and installed the on/off switch next to the low beam adjuster.

http://i128.photobucket.com/albums/p196/cws127/K1200LT%20HID_Motolights%20install%20sml/relay_power_tap.jpg

http://i128.photobucket.com/albums/p196/cws127/K1200LT%20HID_Motolights%20install%20sml/Motolights_switch.jpg

http://i128.photobucket.com/albums/p196/cws127/K1200LT%20HID_Motolights%20install%20sml/end_result.jpg


Now just waiting for my new seat..... :dance:

[Dean_BMW]

Just got off the phone with Fashtek. They said they are still honoring the group buy pricing.

[Texas42]

Just got off the phone with Fashtek. They said they are still honoring the group buy pricing.


Thanks Dean, your the man!!

[Dean_BMW]

Thanks Dean, your the man!!
Hey Bo... I ordered mine... does this mean we have to have another tech session?? :)

[patroa1]

Good news guys, I just talked to Fashtek and he is extending the group buy till the end of summer. :D

So if you haven't order yet you still have till summers end ..... but why wait, it's the best $75 you'll ever spend. :dance:

[sberger]

I'm interested if this is still an open opportunity

[patroa1]

It's still open .... so go ahead and order, you won't be sorry.:D

[sparky_k1200lt]

Hi

I'm a little confused about what I would need to order. I have a 2001 LT, with H7 low beam, H3 high beam. If I want high beam only, I order 1 kit-H3, and if I want both high/low, I would need to order 2 kits, one for each high/low?

I'm also a bit undecided about going the HID way, or going the 'headlight modulator' way. Most roads I travel regularly have enough lighting, or enough other vehicles to provide light.

...Bob

[patroa1]

Bob, I would go with the HID low beam and the headlight modulator on the stock high beam. Thats how I set mine up and am very happy with the results.:D

The h-7 low beam HID is very bright and really lights the road and is very conspicuous in the daytime, had a couple of HD riders ask me yesterday when I stopped for fuel if I was runnning aircraft landing lights because the low beam was so bright, even the wife was impressed by how well it lights the road after dark. So IMHO it's HID low beam and headlight modulator on stock highbeam.

[zippy_gg]

Bob, I would go with the HID low beam and the headlight modulator on the stock high beam. Thats how I set mine up and am very happy with the results.:D

The h-7 low beam HID is very bright and really lights the road and is very conspicuous in the daytime, had a couple of HD riders ask me yesterday when I stopped for fuel if I was runnning aircraft landing lights because the low beam was so bright, even the wife was impressed by how well it lights the road after dark. So IMHO it's HID low beam and headlight modulator on stock highbeam.Because the HID low beam is so bright and WHITE it is sometimes NOT visible during daytime on a sunny day. I witnessed it while riding with a gold LT from TX a few weeks ago. His bright HID low beam was supplemented by a set of yellow Motolites and these added great conspicuity. I could very easily see him when he was riding behind me in daytime.
I just added a set of PIAAs under the cowl and they are yellower than the bright HID, also giving me conspicuity. I went with 7 other bikes on a ride yesterday and was riding sweep. The lead rider could easily spot me from his position.
While I agree that a HID low beam is the best investment you could make on your bike, I would also suggest auxiliary lighting for added conspicuity during daytime, or use a high beam (halogen, hence yellower light) modulator. Night time is NO issue!;)

[Michael_T]

is the group buy still available? if so what' the process?

thx

michael

[Wolfgang]

I bought from them during the last group buy. Quick service, prompt refund od the difference between the group price and what I had initially paid and a great product. I installed both, high and low and greatly recommed doing it. Not much extra work while you at it and the high beam is amazing!

[patroa1]

Mike, this is how to order:

So here are the details of the group buy.

Price: $75 for bike kit, $150 for car kit

How to order:
1.) Just copy and paste this to Pay-Pal sales@fashtek.com (sales@fashtek.com)
2.) Include a confirmation e-mail with Pay-Pal stating which unit you are
buying, ie. h-7 4300k etc
3.) Be sure to mention bmwlt.com group buy also.

[parocket]

I'm a little late on the deal ..butt I just got my bike. Is the deal dead? I send an email direct but got no response yet.

its getting dark out there...

geo

[parocket]

Got a reply back from Fastech and they will still honor the price..looks like a good time to buy.

[parocket]

Quick shipping too. I got my kit Friday. It goes in next week.

Thanks

[staples]

A couple of weeks ago I was contacted by one of our forum members (blkhwk34) and told Fashtek would do another group buy in May and would I check into it since I was the one who set up the previous one.
So I contacted Fashtek, and yes this is true, he would definitely like to do another group buy. The price this time is $75 for bike kit and $150 for car kit, and yes you can mix and match for HI and Low beam.
Right now he is restocking his supply, seems we pretty much depleted it last time, but he would like to know how many are interested. So if you did not take advantage of the last one and are interested please start a list (add name and cut and paste). Once I have a list I will finalise details.

Also he has 50 watt HID's and I'm checking on the price for those also.

Name
I would like high beam.count me in for h9/h11 for 2005lt
STAPLES

[Ajlelectronics]

I would like high beam.

After a scary drive back from France tonight.....

I will have a H3 version please, assuming no problem with UK despatch? At $75 it can't be turned down, especially with such a good exchange rate.

[patroa1]

Guy's, See post #92 for ordering details. Should take about 2 weeks to arrive, he will ship oversea's but shipping is more.