RaffyK
Mar 26th, 2007, 2:29 am
Here is a link to pictures of installed lights, Blue Sea Fuse block and Finix Products' Geno Bar.
http://picasaweb.google.com/y2kltc/MicroDEHIDOnR1150GSAndFuseBlock
I will be shortening the wires going to the fuse block to clean it up.
I used a spare Motolight switch that I had. Cut the end off the switch and wired one wire to the parking lamp and the other to the wire from the relay. Velcroed the switch in the handguard just forward of the clutch lever.
The ballasts were tucked on either side of the main frame between the gas tank and the frame. Right has more room than left. Zip tied the ballast to existing wiring harnesses for good measure.
http://picasaweb.google.com/y2kltc/MicroDEHIDOnR1150GSAndFuseBlock
I will be shortening the wires going to the fuse block to clean it up.
I used a spare Motolight switch that I had. Cut the end off the switch and wired one wire to the parking lamp and the other to the wire from the relay. Velcroed the switch in the handguard just forward of the clutch lever.
The ballasts were tucked on either side of the main frame between the gas tank and the frame. Right has more room than left. Zip tied the ballast to existing wiring harnesses for good measure.