Minus 40!!!

[c00k1e]

Reconnected the nose cone after fitting HIDs.
Computer console now says that the temp is -40! Checked connections, all seems fine.
Anyone else had this? Did it get fixed?

[pozo_izquierdo]

Reconnected the nose cone after fitting HIDs.
Computer console now says that the temp is -40! Checked connections, all seems fine.
Anyone else had this? Did it get fixed?

Yep, wait till summer comes...

Sorry, could not resist... We just had -34 two weeks ago but my bike was not outside then.:p

No, really, this seems odd. Are you sure your temperature sensor cable did not get pinched while you put the tupperware back?

Regards

[mtrevelino]

Once you start riding your LT, it will gradually (1 hour) come back to normal.

[messenger13]

Mine took about 2 days to "fix" itself.

[jvalny]

Fahrenheit or celsius

[Benzbuilder]

Fahrenheit or celsius


At -40 it is the same temp regardless of scale.

[Hilton]

Sorry to hear about your " Cold Snap " When doing some upgrade works I had the nose cone off for over a month. After reinstalling, the temp read as expected. (06 model) Not sure what could cause this issue but it sounds as though others have had similar

[c00k1e]

Mine took about 2 days to "fix" itself.

That sounds promising then. I wont strip it back down - just ride it!

[McAllister]

The plug IS still connected to the temp sensor, isn't it? Two things will cause the temp gage to read -40, disconnecting the battery and disconnecting the connector at the sensor.

[c00k1e]

I discronnected both, but both are now connected. Hopefully as said earlier, it will show the right temp after a ride