Mini-tech session this Sunday March 4th.

[RaffyK]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - ??
2) Roger - K1200GT
3)
4)
5)



.

[amarider]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - ??
2) Roger - K1200GT
3) John - K1200S
4)
5)

[BillyOmaha]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT
3) John - K1200S
4)
5)

[Nathan]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5)
__________________

[LodiHal]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5) Hal - GS: crash bars, aux lights if Raffy has them in stock

[ConspiracyofOne]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5) Hal - GS: crash bars, aux lights if Raffy has them in stock
6) Ray K1200LT - low beam HID, canisterectomy??

[Ted Shred]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - ??
2) Roger - K1200GT
3)
4)
5)



.

What time is this fun fest going to start??

[RaffyK]

Usual time is 9:00 AM.

[Nathan]

What time is this fun fest going to start??

Come with your GS and we can fix and see if the new ligh bar fits.

[RaffyK]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5) Hal - GS: crash bars, aux lights if Raffy has them in stock - I do have them
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada

[ConspiracyofOne]

Ok, where to I need to be at 9am???

[nashty]

Address is 8150 Millie St. Orangevale - Directions from Hwy 50 exit Hazel Ave. pass Madison Ave./Greenback Ave./ Oak Ave. you will see a large church complex on the left side of road, turn left on Stevens first street after church. (At sound wall).Make a right on Millie St. end of road driveway with large boulders going down driveway. From Hwy 80 exit Sierra College Blvd. pass Douglas Blvd/Old Auburn Rd/ 1 mile up road turn at Church of Chrst sign on sound wall Stevens. And follow directions above. Later Rob

[RMoore007]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5) Hal - GS: crash bars, aux lights if Raffy has them in stock - I do have them
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada

[ademarzi]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5) Hal - GS: crash bars, aux lights if Raffy has them in stock - I do have them
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the frony and rear wings, and replace the mirror assembly on the right side. And if there is time replace the mail seal. :rolleyes:

[comstocklt]

Wish I could join in on the fun, but the slave master becons and I must work. I am very interested in attending one of these tech sessions in the future though. I have alot I would like to learn about my LT. I live in Reno so I might not beable to make a 9 am appt. Have fun! ! :(

[LodiHal]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5) Hal - GS: crash bars, GPS install, aux lights if Raffy has them in stock - (I do have them)
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the front and rear wings, and replace the mirror assembly on the right side. And if there is time replace the mail seal.

Thanks Raffy! :D

[dougholck]

Wish I could join in on the fun, but the slave master becons and I must work. I am very interested in attending one of these tech sessions in the future though. I have alot I would like to learn about my LT. I live in Reno so I might not beable to make a 9 am appt. Have fun! ! :(

Come over the night before and I bet you could get company for a ride down the hill and dinner.

[BillyOmaha]

Howdy Raffy,

I sent you a PM.

.

[Ted Shred]

Come with your GS and we can fix and see if the new ligh bar fits.

I will be there...

[Dell]

Hey, I will drop by because I want to see Roger's GT, Nathan's Street Glide, and Hal's GS. Also, I am curious to see Bill ride in on his K1200R and his GS!

BTW with all the talk of California starting to do smog checks on motorcycles we all better save those canisters for the test :)

[dougholck]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide
5) Hal - GS: crash bars, GPS install, aux lights if Raffy has them in stock - (I do have them)
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the front and rear wings, and replace the mirror assembly on the right side. And if there is time replace the main seal.
9) Doug - GS com system, consume chili/beer
10) Dell - test ride all the new bikes.

[Nathan]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide (DONE) Will be there to help.
5) Hal - GS: crash bars, GPS install, aux lights if Raffy has them in stock - (I do have them)
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the front and rear wings, and replace the mirror assembly on the right side. And if there is time replace the main seal.
9) Doug - GS com system, consume chili/beer
10) Dell - test ride all the new bikes.

[RdcrzR]

Rob (Nashty) is hosting a mini tech session at his place to help assist Bill (BillyOmaha) and Roger with some additions.

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide (DONE) Will be there to help.
5) Hal - GS: crash bars, GPS install, aux lights if Raffy has them in stock - (I do have them)
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the front and rear wings, and replace the mirror assembly on the right side. And if there is time replace the main seal.
9) Doug - GS com system, consume chili/beer
10) Dell - test ride all the new bikes.
11) John - K1200LT - 6k + tranny and gear box oil change; Get in the way of other folks doin' stuff :D

[ConspiracyofOne]

Anyone want to ride up from Lodi? If so, call me on my cell at 209-401-0604 since I will not have computer access until Monday.
Ray

[comstocklt]

Come over the night before and I bet you could get company for a ride down the hill and dinner.
[B]Thanks for the offer Doug. Another time I would like to take you up on your offer. However, since my post, we've had about 10" of snow. So my bikes once again sit high and dry, and marooned on a pillar of ice. Plus I now have to work Sunday night too. So, ya'll have fun and let me know if another tech session is planned in our area. My expertic is electrical with specialty in German electrical "hazards" and I have some test equipment I can bring. ( would this be chilly w/beans ? ? ?)
Cheers

[Dan-A]

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide (DONE) Will be there to help.
5) Hal - GS: crash bars, GPS install, aux lights if Raffy has them in stock - (I do have them)
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the front and rear wings, and replace the mirror assembly on the right side. And if there is time replace the main seal.
9) Doug - GS com system, consume chili/beer
10) Dell - test ride all the new bikes.
11) John - K1200LT - 6k + tranny and gear box oil change; Get in the way of other folks doin' stuff
12) Dan-A, I am a definate maybe, and have some hiway bars and a Val 1 install kit for the Gold Wing

[nashty]

John (RdcrzR) i know you have a long ride ahead of you, and since you have a 6K to do the lift is yours. If you can get here about 15min. earlier we can get all the plastic off the bike and out of the way before all the others arrive. Also went shopping so a batch of chili & cornbread will be the order of the day. Again soft drinks/coffee and bottled water our provided if you want to bring something else feel free. Until tommorrow drive safe! Rob

[Dell]

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide (DONE) Will be there to help.
5) Hal - GS: crash bars, GPS install, aux lights if Raffy has them in stock - (I do have them)
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the front and rear wings, and replace the mirror assembly on the right side. And if there is time replace the main seal.
9) Doug - GS com system, consume chili/beer
10) Dell - Last minute change: Install Remus exhause on LT and shop at Roger's LT flea market.
11) John - K1200LT - 6k + tranny and gear box oil change; Get in the way of other folks doin' stuff
12) Dan-A, I am a definate maybe, and have some hiway bars and a Val 1 install kit for the Gold Wing

[RdcrzR]

Anyone else interested in doing some MINOR work? If so, list your name and bike below and things you want to do.

1) Bill - K1200R (high HID) R1200GS (H/L HID, HB tank guard, Kaoko throttle lock, Cannisterectomy) Okay...Okay...Lunch and beer is on me.
2) Roger - K1200GT Val.1, Sirius redio and Baehr unit.
3) John - K1200S
4) Nathan - MP3 on FLHX Street Glide (DONE) Will be there to help.
5) Hal - GS: crash bars, GPS install, aux lights if Raffy has them in stock - (I do have them)
6) Ray - K1200LT - low beam HID, canisterectomy??
7) Raffy - nada
8) Alvaro - Need to replace the front and rear wings, and replace the mirror assembly on the right side. And if there is time replace the main seal.
9) Doug - GS com system, consume chili/beer
10) Dell - Last minute change: Install Remus exhause on LT and shop at Roger's LT flea market.
11) John - K1200LT - 6k + tranny and gear box oil change; BMR Co-pilot shelf install; Get in the way of other folks doin' stuff
12) Dan-A, I am a definate maybe, and have some hiway bars and a Val 1 install kit for the Gold Wing[/QUOTE]

[RdcrzR]

Thanks Rob,

mmmm Chili and corn bread. Good stuff! Last time I darkened your doorway, er garage, that was pretty fine fare.

Didn't see your post until just now. I rode up to N Highlands last night and am in a Days' Inn, so as soon as I get breakfeast, I'll ride over.

John


John (RdcrzR) i know you have a long ride ahead of you, and since you have a 6K to do the lift is yours. If you can get here about 15min. earlier we can get all the plastic off the bike and out of the way before all the others arrive. Also went shopping so a batch of chili & cornbread will be the order of the day. Again soft drinks/coffee and bottled water our provided if you want to bring something else feel free. Until tommorrow drive safe! Rob

[LodiHal]

Thanks to Rob and his wife for their hospitality, and a FINE chili and cornbread lunch! :D

Carzy place, a lot going on everywhere...

[Nathan]

Thanks to Rob and his wife for their hospitality, and a FINE chili and cornbread lunch! :D

Carzy place, a lot going on everywhere...

It was a FUN Day

[LodiHal]

Nathan, thanks for all your work installing my crash bars and light bars. :D:D

[RMoore007]

Thanks Rob and Gail. Great hosting as usual. I really appreciated the chili, cornbread and coffee too.

I didn't get a lot done on my GT but feel pretty good about knowing how to tear it down now. Only had one small screw left.:p I'll find the place for it when I install the Baehr system later.

Also, thanks to all who bought stuff at my LT flea market.:thumb: I hope you all will be satisfied with your purchases. No refunds.:D I will list the rest of the stuff this week.

[Nathan]

Nathan, thanks for all your work installing my crash bars and light bars. :D:D

Any Time. :)

[Dell]

Thanks Rob for the use of your place and your tools. I get the feeling if you don't have it, it doesn't exist! I enjoyed playing Gail's new (to her) piano.

Mr. Flowers, it was so nice of you to exchange my exhaust system for me. As I watched you go about the process I was so impressed by your skills and patience; you only cursed one time :). Thanks again, John.

[Ted Shred]

Well I wasn't there long but it looked like every one was having a great time. I think we had a tech session 1st. A live concert pianist to entertain the troops while they worked!!

I'm loading pics now. Here's the link - Clicky CLICKY (http://www.sealec.com/ted/album37)

[RaffyK]

Gail and Rob for hosting another tech session.

A lot of installations, service items, fix its, flea market and good times.

Bill and I managed to install high and low HID kits on his R1200GS. I am impressed by the size of the CQLights HID ballasts. They are 'wafer' thin which makes it easier to find places to hide them.

Let's see... Since Roger's defrkelization of his bike, I have bought back from him a bunch of stuff that I had added to the bike. Sometimes you just can't let go of things.

It was a great day for a bike ride or work on bikes. It was cool driving down the freeway at 80-85 mph indicated with the targa top off the Porsche.

[Ted Shred]

http://www.sealec.com/ted/albums/album37/IMGP2798.sized.jpg


http://www.sealec.com/ted/albums/album37/IMGP2773.sized.jpg

http://www.sealec.com/ted/albums/album37/IMGP2780.sized.jpg

http://www.sealec.com/ted/albums/album37/IMGP2786.sized.jpg


Went for a nice ride with Scotty and some of the folks from the Ducati forum -
http://www.sealec.com/ted/albums/album37/IMGP2802.sized.jpg

[Steve_R]

I only have one question -- Couldn't you find a bigger gearage?? :rotf: Looks like a good time. :thumb:

[Dan-A]

Thanks Rob, for the hospitality, use of tools and a great bowl of chili.

[amarider]

Thanks Rob for the use of your place and your tools. I get the feeling if you don't have it, it doesn't exist! I enjoyed playing Gail's new (to her) piano.

Mr. Flowers, it was so nice of you to exchange my exhaust system for me. As I watched you go about the process I was so impressed by your skills and patience; you only cursed one time :). Thanks again, John.


Rob and Gail,
Thanks for the great Chili Lunch and everything.

Dell, Any time No Problem but I'm not nearly as skilled as you are playing the piano. :D

[RdcrzR]

Beautiful day. Rob and Gail, thanks for the great chili and corn bread; space and support for doing my 6k fluids change plus. With Dell providing the wrench-bending music, then Rob tickling the ivories a couple of times, too. Couldn't be finer.

Roger, your "check's in the mail."

Great to see old friends again, and meet new ones. Summer's almost here and I'll be seeing many on the road at one or more of the upcoming events.