PDA

View Full Version : 376C Visor

DaveDragon
Oct 19th, 2005, 8:14 am
Here are some photos of the Visor I'm working on for the 376C in the Tourateck Locking Mount.

Note: This is still a work in progress and pretty rough at this point but functional.

http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2299.JPG


http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2298.JPG

http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2297.JPG


http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2296.JPG


http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2295.JPG


http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2294.JPG



http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2293.JPG



http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2292.JPG


http://www.bmwlt.com/gallery/files/2/6/0/7/CIMG2291.JPG
Steve_R
Oct 19th, 2005, 7:05 pm
Think you've got enough bill on that thing?? ;) :D
DaveDragon
Oct 19th, 2005, 7:50 pm
I got a lot of SUNSHINE STATE to deal with. :)
Steve_R
Oct 19th, 2005, 8:12 pm
Think you're gonna have sunshine by the weekend?? I can't believe what's building down in Caribbean right now. Sheesh!!!
motorhead
Oct 21st, 2005, 1:48 am
Damm Dave, Lookin at the sheer lenth of that sunshade ~ would sware you must be a baseball fan :rolleyes:

If I may critisize, sides need to be longer for light glare.

;) Got enought farkles on the dash ?

Lookin good bud.

Scott
grifscoots
Oct 21st, 2005, 4:33 am
I take it the screen isn't of the same caliber as the 276C then? Or the weather stuff isn't showing up well?
DaveDragon
Oct 21st, 2005, 7:24 am
The Weather shows up Great and the Screen is fantastic compared to the SPIII/Navigator.

The Visor is a prototype and the sides do need a little more length.
The Mount holds it firmly to the GPS on the Top.
grifscoots
Oct 21st, 2005, 9:01 am
The Weather shows up Great and the Screen is fantastic compared to the SPIII/Navigator.

The Visor is a prototype and the sides do need a little more length.
The Mount holds it firmly to the GPS on the Top.

Cut yourself yet?:D (the voice of experience spakes)
DaveDragon
Oct 21st, 2005, 10:22 am
No been lucky there, the snips I use leave a serrated edge that's not as sharp as a straight edge.
grifscoots
Oct 21st, 2005, 11:10 am
No been lucky there, the snips I use leave a serrated edge that's not as sharp as a straight edge......

....but cut deeper!:D
DaveDragon
Oct 21st, 2005, 9:21 pm
Here ya go Grif, Got a couple of shots on the ride home this afternoon.
It was nice not guessing if I needed the Frogg Toggs :)
jpalamaro
Oct 22nd, 2005, 8:47 pm
How do you have the Sat. Antenna mounted to BMR shelf. Was going to use Velcro on shelf and puck, but the non-scratch material on the bottom of the puck seems to resist anything sticking to it. Guess I will snip a piece of steel and adhere it to shelf and let the magnet in puck do its job. DON'T LIKE THAT THO'

So, am interested in your puck mount . . . presume you want portability.
DaveDragon
Oct 23rd, 2005, 10:02 am
I have the short right wing and the long right wing.

The V1 is on the long wing.
I took the metal plate off the white plastic pole mount and used it as a drill template to mark the short wing, drilled four holes and cleaned them up.
Two screws hold the plate to the wing, two screws go up through the bottom of the wing and pass through the plate and into the mounting holes of the puck antenna.

Not easy to move or swipe :)