Piaa 910 relay High Beam trigger...

[Mike_the_Rat]

Hello All,

Which high beam wire should I tap into for a relay to trigger Piaa 910's. I can't remember what wire I tied into for my '01.

Warm regards,
Mike "the Rat"
05 K1200LT

[RaffyK]

brown is almost always ground. So whatever the other one is should be positive. Have not looked at '05 wire colors. If they used same colors like the pre 2005 bikes, then you should have either a solid white or white with yellow stripe.

[mneblett]

Hello All,

Which high beam wire should I tap into for a relay to trigger Piaa 910's. I can't remember what wire I tied into for my '01.

Warm regards,
Mike "the Rat"
05 K1200LT

Just walked out to my 05 -- Raffy's right -- brown=ground, white is high beam +

[meese]

Nice avatar, Mike. :)

[Mike_the_Rat]

Thanks for the help for trigger wire. Over the weekend I was able to install HIDS, 1100x and 910's.

Now I can see again and be seen...

Warm regard,
Mike "the Rat"
05 LT

[RaffyK]

You are welcome. I am sure Mark has the same sentiments. :)