amarider
Jul 15th, 2006, 6:07 pm
I Had been wanting to try a set of the Adventure Winglets on my 05 GS for a while now and finally found the time to install them. Below is the minium you'll need for parts.
06 32 7 657 966 screw x 4
46 61 2 308 594 washer x 4
46 63 7 664 846 bushing x 4
46 63 7 694 399 left wing
46 63 7 694 400 right wing
I also added some large washers on the under side.
Total price was under $60 at the local BMW dealer, you can save about 20% from Chicago BMW if you can wait a few weeks.
Installation takes about 30 minutes, just line them up, drill 4 holes and install. Note some aftermarket windscreens can get in the way. On my Cee Bailey I had to cut the back corners down about 1.5 inches.
They seem to work well and cut the noise down by about 50%, and they don't seem to flex in the wind enough to cause any problems.
06 32 7 657 966 screw x 4
46 61 2 308 594 washer x 4
46 63 7 664 846 bushing x 4
46 63 7 694 399 left wing
46 63 7 694 400 right wing
I also added some large washers on the under side.
Total price was under $60 at the local BMW dealer, you can save about 20% from Chicago BMW if you can wait a few weeks.
Installation takes about 30 minutes, just line them up, drill 4 holes and install. Note some aftermarket windscreens can get in the way. On my Cee Bailey I had to cut the back corners down about 1.5 inches.
They seem to work well and cut the noise down by about 50%, and they don't seem to flex in the wind enough to cause any problems.